Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

DIY AFM fitting question

Thread Tools
 
Search this Thread
 
Old 27 May 2002 | 10:58 AM
  #1  
bruce's Avatar
bruce
Thread Starter
Scooby Regular
iTrader: (5)
 
Joined: May 2000
Posts: 1,002
Likes: 0
Question

I finally got round to building John Banks's DIY AFR Meter this weekend, using the connector diagram for B136 to find Pin21 from http://www.mrtrally.com.au/performance/docs/WRX-V5.pdf page 33, describes the connector as being blue. On my MY97WRX all 3 connectors to the ECU are yellow, and have 2 rows of pins not 4 as in the diagram from the above PDF document. Has anybody else fitted one of these devices to an import? if so could you describe the necessary connection for the input to the AFR meter?.

Thanks.
Old 27 May 2002 | 11:32 AM
  #2  
Chris.Palmer's Avatar
Chris.Palmer
Scooby Regular
 
Joined: Dec 2001
Posts: 835
Likes: 0
Thumbs up

Pre My97s have different ECUs & connectors.

Check out my home page (see profile) for earlier ECU Pinouts.

Cheers m8.

Chris
Old 27 May 2002 | 11:43 AM
  #3  
bruce's Avatar
bruce
Thread Starter
Scooby Regular
iTrader: (5)
 
Joined: May 2000
Posts: 1,002
Likes: 0
Thumbs up

Thanks Chris
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM
Rocco13
ScoobyNet General
8
13 September 2015 08:11 PM
ossett2k2
General Technical
9
13 September 2015 09:35 AM



Quick Reply: DIY AFM fitting question



All times are GMT +1. The time now is 12:02 AM.