Help....R180 Blobeye 03-05 Driveshafts
#1
Scooby Newbie
Thread Starter
Join Date: Nov 2013
Location: Grays
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Help....R180 Blobeye 03-05 Driveshafts
Can anyone help ...am using a Subaru diff in a Birkin build(like a caterham). The Diff I've fitted is a 27011AA920 R180 which I have been told comes from an Impeza WRX STI Blobeye 03-05.
The drive shaft ends which fit into the diff have 27 splines and an O/D of about 27mm again I have been told that these are 28421FG022 shafts.
The drive shafts I have have a different ends which match an R160 diff ( I didn't realise they were different ) ....I need to get new ends machined up..cpsdrivelink can do it but I have no dimensions or the correct driveshaft to use as a pattern
Can anyone tell where I can get the dimensions or as a last resort a drive shaft that can be used as a pattern..
The drive shaft ends which fit into the diff have 27 splines and an O/D of about 27mm again I have been told that these are 28421FG022 shafts.
The drive shafts I have have a different ends which match an R160 diff ( I didn't realise they were different ) ....I need to get new ends machined up..cpsdrivelink can do it but I have no dimensions or the correct driveshaft to use as a pattern
Can anyone tell where I can get the dimensions or as a last resort a drive shaft that can be used as a pattern..
Thread
Thread Starter
Forum
Replies
Last Post