Clutch change on a classic T2000?
#1
Scooby Regular
Thread Starter
Join Date: Jun 2008
Location: MK
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Clutch change on a classic T2000?
Hi. How easy is it to do a clutch change on a 1999 Turbo 2000? Is there a guide for doing this and are any special tools needed? I've done clutches on Land Rovers before but not these and don't know if its more than what I'd like to take on.
Thanks.
Thanks.
#2
Scooby Regular
iTrader: (3)
Join Date: Mar 2008
Location: Berkshire
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Either engine out our gearbox out. If you have access to a workshop with a ramp, then gearbox out option would be favorite. Otherwise hoist and engine out.
Not a difficult job - there are several howto threads on here. Most problems seem to be with people forgetting to remove the clutch fork pin behind the starter motor (under a hex screw plug) and the fact that splitting the clutch housing from the engine can be a pain.
Not a difficult job - there are several howto threads on here. Most problems seem to be with people forgetting to remove the clutch fork pin behind the starter motor (under a hex screw plug) and the fact that splitting the clutch housing from the engine can be a pain.
Thread
Thread Starter
Forum
Replies
Last Post
matt12
ScoobyNet General
59
08 November 2015 09:15 PM
MH-Racing
Subaru Parts
18
18 October 2015 04:49 PM