WRX to STi front hub upgrade
01 January 2012, 07:51 PM
#1
Scooby Regular
Thread Starter
Join Date: Mar 2003
Location: Belper,Derbys
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
WRX to STi front hub upgrade
I'm looking to upgrade the front wheel bearings on my 2002WRX race car to the bigger STi hub with the bigger bearing.
I dont want to change all my wheels so I either need to re-drill and tap the wheel stud holes or try and find some hubs with the correct PCD which is 100mm.
I've also been told that I'll need to mill the sides of the hub where the strutt mounts as the STi hubs are wider. Any machining thats required isnt really a problem as i've got access to a machine shop but I'd like to start out with the parts that are going take the least modification. Any advice would be appriciated.
Cheers Martin.
I dont want to change all my wheels so I either need to re-drill and tap the wheel stud holes or try and find some hubs with the correct PCD which is 100mm.
I've also been told that I'll need to mill the sides of the hub where the strutt mounts as the STi hubs are wider. Any machining thats required isnt really a problem as i've got access to a machine shop but I'd like to start out with the parts that are going take the least modification. Any advice would be appriciated.
Cheers Martin.
Last edited by CRF450; 01 January 2012 at 07:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Danny0608
Subaru
6
27 September 2015 02:16 PM
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM
