auto to manual conversion
#1
auto to manual conversion
ive just finished the lovely job of changeing my auto scooby to manual transmission,now the problem is my loom in the car had 2 multiplugs with around 9 wires on each plug.
...but the manual box i have only has 4 wires coming from it....what id like to know is which wires on the cars multi plugs do i need to find to splice to gbox into?
...but the manual box i have only has 4 wires coming from it....what id like to know is which wires on the cars multi plugs do i need to find to splice to gbox into?
#3
Former Sponsor
iTrader: (4)
Join Date: Jul 2003
Location: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Posts: 6,377
Likes: 0
Received 3 Likes
on
3 Posts
When we've done this in the past we have singled out the wiring for the reversing lights and just left the original gear shift neutral start switch wiring connected, but tucked away out of sight. Above or beside the 5 speed box up in the tunnel.
It is important to leave the Auto selector in Neutral or the original system will think it is in drive or reverse and not start the car.
You also need to remove the ecu for the auto box from up behind the speedo. Just unplug it and leave the connectors tucked away again.
That's about as hard as it gets.
David APi
It is important to leave the Auto selector in Neutral or the original system will think it is in drive or reverse and not start the car.
You also need to remove the ecu for the auto box from up behind the speedo. Just unplug it and leave the connectors tucked away again.
That's about as hard as it gets.
David APi
Thread
Thread Starter
Forum
Replies
Last Post