exedy pink box friction plate
#1
exedy pink box friction plate
i have a crank seal oil leak which is getting on to the clutch its only slipped say twice as when it done it i put my boost down to 0.9 bar and ploded about on it,
am i right in saying when it goes in on tue for the crank seal, that i will need to replace my friction plate as well?
or would it be ok to clean and reuse?
Darc
am i right in saying when it goes in on tue for the crank seal, that i will need to replace my friction plate as well?
or would it be ok to clean and reuse?
Darc
#2
Scooby Regular
iTrader: (2)
Join Date: Apr 2007
Location: london
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
If you are going for all the trouble of taking the gear box out it will be Worth
changing the center plate as i think they are about £80 to £90 and give the presser plate a good clean with brake cleaner make shore you use a genuine seal to be on the safe side.
all the best
peter
changing the center plate as i think they are about £80 to £90 and give the presser plate a good clean with brake cleaner make shore you use a genuine seal to be on the safe side.
all the best
peter
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
speedrick
Subaru Parts
0
26 September 2015 03:01 PM