DGRALLYING

I Have just purchased a Dump Valve from Scooby Sport.

Can you tell me where the hoses go???

Would be great if you have some pictures as well

Many Thanks

[Edited by DGRALLYING - 2/17/2002 6:53:01 AM]

mega_stream

I assume its a DTA?

Don't do the bolts up too tight when you fit the new one.
Make sure the gasket is on properly.

If its a DT Atmos type the alloy end cap goes on the thick pipe that comes off the original to blank it off. The small pipe goes back on the new valve.
I used a cable tie to secure the unused pipe.

I can send a picture of mine, but it monkey business to fit m8.

John

[Edited by mega_stream - 2/17/2002 8:00:29 AM]

James_PowerMad

BTW. They don't all bolt on to the intercooler! MY98 has its dump valve down to the right of the intercooler on two large hoses.

I believe that some other earlier scoobs had the DV on the left hand side of the intercooler (not bolted either)