mole

Spose I might be, well, has anyone heard of it ?

I was thinking of a DIY version using the existing headlight washer system. (Light washers no good anyway).

Do any of the well educated scoob chaps on here know if this has ever been done ? I have never seen it in mags or video, only on top mounts.

I can't really believe that it would make much of a difference until hot summer (?)

Anyone ?

Moles Dad

Danny Fisher

I know that the Evo's run it.

Dan

Robertio

iTrader: (1)

One thing to bear in mind is that (AFAIK) your headlight washers use the same water source as your screen washers, not sure if spraying screenwash over your engine would do it much good (should keep it clean through )

mole

I will look at some evo tests and see if there is any benefit to water spray on FMIC.

As for screenwash, I have thought of this too, I would probably mount a second resevoir for the FMIC.

Does anyone have an evo with water spray that could give some input to this thread?

Thanks guys, Moles Dad.

submannz

Quite a few newer model WRX's have the intercooler sprayers also.

Dan

stevie c

I havent seen any scoobs but I have seen a Renault 5GT Turbo with the spray for the FMIC,owner seems to think it makes a difference.

Steve

jmca

Just to follow on from what Steve said - GT Tuning do this for the Renault 5 Turbo - http://www.gttuning.com/cooling.htm . They sell the kit seperately as well.

Johny.

EvoRSX

Mole,
I've got an Evo and its got waterspray on it as well.
Only ever really use it before a good hard blast. That way the water is alreasy on the i/c and provides the cooling effect when the heat from the boost spikes appear.
You can always then add a blast as you're running just to keep everything cool. I've got a digi thermometer measuring intake temps and so I can see when they are going hot and give it a blast to keep it all cooled down a bit.

Don't know how effective it is but I've never seen intake temps above about 30 deg C whilst driving hard. But then again, maybe that's because I can't drive that well

Andy

P.S. This is the reason that you see some scoobies at Santa Pod before a run with ice packed into the top mounts to try and get everything cool before the run. I would imagine you could achieve the same effect on a front mount with a good blast from a hosepipe before going out.

Adam M

water spray should be used as the temp rises, not before it.

It isnt a reservoir that will keep temps down.

Front mounts already keep temps down very low. Water spray is an extra useful addition.

EvoRSX

Adam,
If you use the water spray as the temps are rising then the water doesn't have time to minimise the temperature spike as it happens i.e. the temp spike has already happened before the water has chance to absorb the heat. By adding the water to the intercooler before the temp spikes you have the water on the i/c ready to soak up the heat as the temp spike begins rather than trying to cool it as it happens.

As well, the high airflow through the i/c when moving fast means that the spray doesn't distribute well whilst driving and the majority of it will be blown away from the i/c before even having chance to settle on it.

Andy

mole

Thanks everybody, I think I'm sold !!!

Going to start the design soon, will go for a boot mounted tank and use the headlight washer jets (new ones) with a simple (thats me) timer circuit to "pulse" every 15 secs (variable).

Will post something when its up and running...or wont if it dont.

Thanks again, Moles Dad

mutant_matt

I'm surprised nobody has pointed this out yet but the headlight washers spray a jet of water whereas Water spray jets are "foggers" which create a fine mist.....you wanna get some of these if you're gonna do it...

Matt

P.S. Scott J Davies has his STi Water Spray jets relocated in front of his FMIC for a bit of extra cooling.....

mole

Thanks Matt, I didn't know that, but it does make sense though.

I presume that one can obtain these as "spares" from one of the kit manufacturers.

Have to give it a bit of research before I get going.

Cheers, Moles Dad.

submannz

Mole, EvoRSX is correct unless you setup the intercooler spray unit to work on a temperature switch you are waisting time money and effort.

Dan

Bob Rawle

Gibber, gibber gloop etc etc.

Yes I have this installed with my front mount, it was originally put in for the top mount but I thought "why not" when I changed over. maybe thats why I only get about 6 deg temp rise typically, the charge temp actually falls first before rising again, with it off (read run out of water) it just rises. Run mine of my boot mounted Forge tank.

mole

Cheers all, I think (maybe), I will look at prices of complete kits and make a decision based on that.

Given that I have just done over 3 THOUSAND POUNDS on bits, a few more quid ain't going to kill me ! (wife probably will).

Thanks, Moles Dad.

EvoRSX

As well as making it automatic, it's advisable to have a switch you can flick it on and off as well so that the pump doesn't eun dry when the water runs out.

If you want, I've got some info at home on how to build a DIY intelligent i/c waterspray. I can send you the details if you're interested. It also has part no.s for nozzles etc etc.

Andy

mole

EvoRSX, thanks for the advice, yes I would like the info if you dont mind sending it...you can send on e-mail or post it on here, whichever is most suitable.

Cheers, I just cant get over the HKS Ssqv...Moles Dad.

mutant_matt

Andy,

I would be interested in those details too if you don't mind....

Cheers,

Matt

mole

EvoRSX, we have no mail!!!

Scott J Davies

yep its on my car original kit relocated your not mad its nnniiicccceeeeeeeeeeee. I'll try and post piccies tm fella.

EvoRSX

Mole + Dad,
Sorry, completely forgot I was going to send it to you....
Will sort it out tonight.

Andy