Help! 'misplaced' internal parts for my Dawes
#1
Scooby Regular
Thread Starter
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
Why not email Darren Dawes or just buy a few sizes from a hardware store if such a thing exists these days? It has to be big enough to push neatly against the spring but not too big that it can't move freely.
#2
if you talk to jamie also
http://www.scoobynet.co.uk/bbs/threa...threadid=69621 he might send u a spare for a relatively small price through deliverey of a bulk order????
http://www.scoobynet.co.uk/bbs/threa...threadid=69621 he might send u a spare for a relatively small price through deliverey of a bulk order????
#3
\m/ ^_^ \m/
cheers, i'm guessing that its just the ball that i'm missing and nothing else.
i've got some lying about the garage, is the ball slightly wider than the spring so it can't go inside it, i'm presuming its brass not plastic (would it make a difference?)
i've got some lying about the garage, is the ball slightly wider than the spring so it can't go inside it, i'm presuming its brass not plastic (would it make a difference?)
#4
BANNED
Join Date: Jan 2001
Location: In my own little world
Posts: 9,644
Likes: 0
Received 0 Likes
on
0 Posts
Dont worry...
First it is not plastic!!
If you look inside you will see its "Seating" as long as the ballbearing fits and does not wobble about inside from side to side it will be ok.
Should be easy
Luke
First it is not plastic!!
If you look inside you will see its "Seating" as long as the ballbearing fits and does not wobble about inside from side to side it will be ok.
Should be easy
Luke
#5
\m/ ^_^ \m/
your right it could be, not the case though, got caught out by the twist in the hose and it unscrewed itself too far and the internal parts fell out - very embarassing
Any way got a couple of bearings from a local bearing supplier (7mm did the job), and best of all i didn't have to pay for it as it was under a fiver
All works now, and i'm happy again
Any way got a couple of bearings from a local bearing supplier (7mm did the job), and best of all i didn't have to pay for it as it was under a fiver
All works now, and i'm happy again
#7
\m/ ^_^ \m/
Not a happy person, i seem to of somehow 'misplaced', shall we say, the parts inside my dawes while adjusting it.
I've got the spring, but i'm missing the ball bearing , does anyone know what size it is (bigger or smaller than the spring in diameter) and is there anything else missing?
don't really want to have to buy another one
edited to make more sense
[Edited by flat4 - 2/3/2002 5:56:40 PM]
I've got the spring, but i'm missing the ball bearing , does anyone know what size it is (bigger or smaller than the spring in diameter) and is there anything else missing?
don't really want to have to buy another one
edited to make more sense
[Edited by flat4 - 2/3/2002 5:56:40 PM]
Trending Topics
#8
\m/ ^_^ \m/
you can imagine my horror as it all flew to bits and disappeared off the face of the planet
[Edited by flat4 - 2/4/2002 12:30:35 AM]
[Edited by flat4 - 2/4/2002 12:30:35 AM]
#9
How exactly did it "flew to bits and disappeared off the face of the planet" ?
I take it that it was not put back together properly ?
Your post above could be misinterpreted that the Dawes MBC is poorly made.....
I've had no problems with mine and it is VERY well put together.....
Thanks
Gavin
[Edited by GavinP - 2/4/2002 11:01:42 AM]
I take it that it was not put back together properly ?
Your post above could be misinterpreted that the Dawes MBC is poorly made.....
I've had no problems with mine and it is VERY well put together.....
Thanks
Gavin
[Edited by GavinP - 2/4/2002 11:01:42 AM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM