Dawes AFR - How much inc shipping & duty
31 January 2002, 12:01 PM
#3
I did, I'm working out if it's worth me building them on a commercial bassis.....
Origionally I thought it wouldn't be cost effective, but I have re-laid out the ciruit and made a few adjustments, so I think it may now be a possibility....
Origionally I thought it wouldn't be cost effective, but I have re-laid out the ciruit and made a few adjustments, so I think it may now be a possibility....
31 January 2002, 12:49 PM
#5
Scooby Regular
Join Date: Dec 2001
Posts: 835
Likes: 0
Received 0 Likes
on
0 Posts
Scott,
Yep - I used your idea of LEDs & similar slope arrangement.
The only other differences are:
I used LED Clips - makes fitting a lot easier
I also added 1.3mm socket & switch so I could power it from the lighter socket & turn it off when it bugged me.
Chris
PS - edited to add - I also changed the default mode from dot to bar by applying potential to pin 9.
[Edited by Chris.Palmer - 1/31/2002 12:56:16 PM]
Yep - I used your idea of LEDs & similar slope arrangement.
The only other differences are:
I used LED Clips - makes fitting a lot easier
I also added 1.3mm socket & switch so I could power it from the lighter socket & turn it off when it bugged me.
Chris
PS - edited to add - I also changed the default mode from dot to bar by applying potential to pin 9.
[Edited by Chris.Palmer - 1/31/2002 12:56:16 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM