will it fit
#1
will it fit
I have a removed a P1 box from a 1995 car will this gearbox fit without modding anything else?
Subaru Impreza 2002 Reconditioned Gearbox on eBay, also, Subaru, Car Parts, Cars, Parts Vehicles (end time 22-May-08 20:59:24 BST)
Subaru Impreza 2002 Reconditioned Gearbox on eBay, also, Subaru, Car Parts, Cars, Parts Vehicles (end time 22-May-08 20:59:24 BST)
#2
Scooby Senior
iTrader: (68)
It will bolt up no problem but the issue you will have is that it runs a 3.9 final drive. You will need a 3.9 final drive rear diff, which to retain your existing rear end means finding a diff from a version 2 sti ra (very rare), or a getting a rear diff from a newage jdm sti.
Getting the diff from a newage car also means you will need the drive shafts, hubs and rear brake setup from the same car.
Banny
Getting the diff from a newage car also means you will need the drive shafts, hubs and rear brake setup from the same car.
Banny
#3
It will bolt up no problem but the issue you will have is that it runs a 3.9 final drive. You will need a 3.9 final drive rear diff, which to retain your existing rear end means finding a diff from a version 2 sti ra (very rare), or a getting a rear diff from a newage jdm sti.
Getting the diff from a newage car also means you will need the drive shafts, hubs and rear brake setup from the same car.
Banny
Getting the diff from a newage car also means you will need the drive shafts, hubs and rear brake setup from the same car.
Banny
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM