Jasma / Fujitsumo exhaust systems
22 December 2001, 07:57 PM
#2
Scooby Regular
Join Date: Aug 2000
Location: LADS: Lancashire and Discrict Subaru Owners Club
Posts: 1,467
Likes: 0
Received 0 Likes
on
0 Posts
'Jasma'(Japanese Automotive Sport Muffler Association) I'm pretty sure Jasma is not a make of exhaust, I think they are the equivalent of the Britsh standard association, but for exhausts.
This is what I've got, but you'll have to get it translated through your pc, takes around 25mins
http://www.fujitsubo.co.jp/
Hope this helps!
CRAFT
This is what I've got, but you'll have to get it translated through your pc, takes around 25mins
http://www.fujitsubo.co.jp/
Hope this helps!
CRAFT
22 December 2001, 11:52 PM
#3
Scooby Regular
Join Date: Aug 2000
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
My 95 WRX came from Japan in 99 with a Fujitsubo Legalis R exhaust system fitted, 3" bore throughout, 4" tailpipe. I like it, although it's a bit too quiet for me. 
If you want to buy one over here, look at www.upauto.co.uk under 'exhaust system' & 'subaru' ...they're £615 + vat! 
Hope this helps!
Leigh
If you want to buy one over here, look at www.upauto.co.uk under 'exhaust system' & 'subaru' ...they're £615 + vat! Hope this helps!
Leigh
23 December 2001, 07:20 AM
#4
Scooby Regular
Join Date: Oct 2001
Posts: 1,260
Likes: 0
Received 0 Likes
on
0 Posts
Yep - Fujitsubo is regarded as one of the best A/M exhaust makers in Japan, and may well be the most popular for Subies that are not modded OTT (despite not being the cheapest).
They make all sorts of levels of exhaust, from response/low-mid range focused models, to hi-rpm/hi-power stuff.
JASMA, as pointed out, is the standards assoc. for exhausts here, and to get that plate on your product, your muffler will have had to pass a pretty strict pass-by noise test among other things (hence it being "quiet"). Fujitsubo also makes stuff that does not meet these stds...
Cheers.
They make all sorts of levels of exhaust, from response/low-mid range focused models, to hi-rpm/hi-power stuff.
JASMA, as pointed out, is the standards assoc. for exhausts here, and to get that plate on your product, your muffler will have had to pass a pretty strict pass-by noise test among other things (hence it being "quiet"). Fujitsubo also makes stuff that does not meet these stds...
Cheers.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
