3 wire MAF voltages
Thread Starter
Scooby Regular
Joined: Jun 2002
Posts: 886
Likes: 1
From: Rochester
3 wire MAF voltages
As per title.
If anyone can help with the voltages.
Looking at the back of the sensor plug, I have:
12v at the left pin
0v in the middle
1.1-1.3v on the right
wire colours, from L to R
yellow/blue, pink and white
Just would like to know if these are correct, otherwise the MAF is knackered
Cheers
Mark
If anyone can help with the voltages.
Looking at the back of the sensor plug, I have:
12v at the left pin
0v in the middle
1.1-1.3v on the right
wire colours, from L to R
yellow/blue, pink and white
Just would like to know if these are correct, otherwise the MAF is knackered
Cheers
Mark
Former Sponsor
iTrader: (4)
Joined: Jul 2003
Posts: 6,377
Likes: 3
From: @Junc 12, M40 Warwicksh; 01926 614522 CV33 9PL -Use 9GX for Satnav. South Mids Alcatek ECu dealer
Originally Posted by GTB Limited
As per title.
If anyone can help with the voltages.
Looking at the back of the sensor plug, I have:
12v at the left pin
0v in the middle
1.1-1.3v on the right
wire colours, from L to R
yellow/blue, pink and white
Just would like to know if these are correct, otherwise the MAF is knackered
Cheers Mark
If anyone can help with the voltages.
Looking at the back of the sensor plug, I have:
12v at the left pin
0v in the middle
1.1-1.3v on the right
wire colours, from L to R
yellow/blue, pink and white
Just would like to know if these are correct, otherwise the MAF is knackered
Cheers Mark
Doesn't answer your original question about voltages but if you've had a Lambda change at sometime might explain the problem.
Good Luck Kind regards David
APi Impreza / APi Engines
www.apiengines.com
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
