powersteering help needed!!!!!
#1
Scooby Regular
Thread Starter
Join Date: Jan 2005
Location: Middlesbrough
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
powersteering help needed!!!!!
ok the powersteering on my car a 95 wrx is not working properly, on tick over and below 2500rpm it doesnt work and the steering is unbelievably hard, above 2500rpm ish it works ok but for parking etc its near impossible. The belt is fine and the pulley is turning, the fluid is fine and a good colour/clean. When the car is running and you take the top off the powersteering the liquid seems very still no movement at all. Any ideas whats happening. Ive just reduced the tick over from 1000-1200 to 800 in the past few days could this have something to do with it? Or is it just some sort of seal that needs replacing?
cheers simon
cheers simon
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
possible air lock or the pump is dying.. or the rack..
try jacking up the front and turning lock to lock a number of times with the engine running and see if the level in the res drops.. or if it helps.
try jacking up the front and turning lock to lock a number of times with the engine running and see if the level in the res drops.. or if it helps.
Thread
Thread Starter
Forum
Replies
Last Post
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM