Mot and Cat question
How long would it take to get the middle cat fully hot? I forgot I removed (read melted) the front 1 and took the car in for the MOT and it failed. The readings were dropping but not enough when they first tested.
Would a 2 hour run @70 mph then a test straight after work to get the readings low enough?
Cheers
Simon
Would a 2 hour run @70 mph then a test straight after work to get the readings low enough?
Cheers
Simon
Originally Posted by Simon C
How long would it take to get the middle cat fully hot? I forgot I removed (read melted) the front 1 and took the car in for the MOT and it failed. The readings were dropping but not enough when they first tested.
Would a 2 hour run @70 mph then a test straight after work to get the readings low enough?
Cheers
Simon
Would a 2 hour run @70 mph then a test straight after work to get the readings low enough?
Cheers
Simon
unless you're going somewhere at the same time, i wouldn't bother wasting the juice for 2 hours, would have thought temps are up to normal operating temp within 1/2 hour?
will need a good run if you do alot of short runs though ( i know mine did! )
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM



