Head Gasket Blown
Dennis commons of longhorsely are a dealer I use and recommend, they will charge dealer prices but you will get an A1 job. Revolution beside the baltic centre may do it but you would have to make enquiries. 

Problem here is you can get a cheap job done, though it is essential to check the heads aren't warped & the block is straight to.
In one set of heads they were 11 thou out & on the block the cylinder walls were out by 6 though & the sides 1 thou....Had that been put back together, there would have been issues.
Plus its worth checking all the inlet/exhaust valves, high revving will see them getting bent....
In one set of heads they were 11 thou out & on the block the cylinder walls were out by 6 though & the sides 1 thou....Had that been put back together, there would have been issues.
Plus its worth checking all the inlet/exhaust valves, high revving will see them getting bent....
Trending Topics
Pity you are not in the West Midlands, as APIengines do all the flatness checking during the gasket change, did mine and they are solid as a rock.
AS Performance won't do you wrong either. Good bloke to deal with IMHO.
911
AS Performance won't do you wrong either. Good bloke to deal with IMHO.
911
Bit late now but.... hostagewrx seeing as tho you are in Manchester why didn't you use ProSport in Stockport. They have been a Subaru specialist for many years (way longer than the 5 i've had mine) and are now officially recognised by Subaru too for servicing and warranty work.
Not saying you shouldn't use AS, i've had parts from Alyn and wouldn't hesitate to use them but they are so far away. ProSport are on your doorstep.
Tony.
Not saying you shouldn't use AS, i've had parts from Alyn and wouldn't hesitate to use them but they are so far away. ProSport are on your doorstep.
Tony.
Yeah cheers mate, but i broke down from Manchester to Newcastle, got to Durham and it went!!! Booked the car into AS Performance now! Will post another topic about towing cars!!!!
So waiting a week or so for news on the car, will keep everyone updated cheers
So waiting a week or so for news on the car, will keep everyone updated cheers
expensive though im sure for what needs to be done its a good amount...it would just hurt if i had to spend another 500quid to get something fixed...
How comes they need to be changed?
How comes they need to be changed?
Wellw as driving up the motorway at about 70mph!!!!! and the heater went cold (1st sign) the engine temp went high (2nd sign) and then the engine temp went vertical (final sign) pulled in, turned off engine. Restarted and it wouldn't have it so called RAC
Sure enough water in oil, white emulsion etc so head gasket blown, which one or both i dont know, cylinder head cracked or warped i dont know!!!
Could be a big bill in the end, plus only just had a new clutch fitted and a coil pack fault sorted and a service, so far
Cost of car £4040
Service+coil £225
Clutch installed £246
And lets see this one!!!
Sure enough water in oil, white emulsion etc so head gasket blown, which one or both i dont know, cylinder head cracked or warped i dont know!!!
Could be a big bill in the end, plus only just had a new clutch fitted and a coil pack fault sorted and a service, so far
Cost of car £4040
Service+coil £225
Clutch installed £246
And lets see this one!!!
Sorri to hear that mate....i would tell you my story by i wont go into it..money money money, you can be forever be spending money on a car...like a never ending story...
Thanks for the tips, touch wood it don't happen to me, but atleast i will know what is going on when i see all that...
Good luck..
Thanks for the tips, touch wood it don't happen to me, but atleast i will know what is going on when i see all that...
Good luck..
Thread
Thread Starter
Forum
Replies
Last Post



.