911

Just as title.

Any special tweeks, hose incompatability etc.

anyone know for sure if this can be done?
Can make/weld any weird bracketry and not bothered about removing the Sti front brace to get it in.

911

stevebt

iTrader: (8)

if the bulk head is the same distance away from the inlet maifold as the 99 impreza yes it will fit

Mark A

iTrader: (1)

I had to "trim" the bulkhead and adjust the throttle body and IC outlet. Took me two days working slowly in the street. I think the easy solution would be to raise the inlet manifold so the IC clears the bulk head and possible adjust the angle of the throttle body.
The Hybrid FMIC was easier to fit once I'd hacked the the front bumper and got the pipes the right way round !

Forgot to mention that the inlet valve thing hits the dump valve oulet.

Mark

Mark A

iTrader: (1)

May be I'll send a picture it might explain it more clearly. Having just read my post

Mark

stevebt

iTrader: (8)

ive put a forge dump valve on mine with no problems, my blitz was too big

JIM THEO

Have a look at Projects on 22B forum there is one example with fitting instructions/help.
JIM

911

Excellent!
How does anyone work on a Scooby in the street?
Dedication, or are you do-lally Mark!
911 this characature look how I feel getting this bloody hill climber up to spec...