Free Bugeye Tek3 custom remap
Thread Starter
Subaru Tuning Specialist
Joined: Jun 2002
Posts: 6,654
Likes: 1
From: 7.74 @179 mph 1/4 mile - road legal
OK here's the deal.
As a recent EcuTek distributor I wish to develop base maps for MY01-04 cars.
It was my original intention to buy my own bugeye to develop the maps, as I have previously done with the Apexi Power FC ECU on my own MY95 WRX and 99 Sti cars. The purchase has been put on hold temporarily but I don't want to delay EcuTek progress any longer.
I need from you ....
Your MY01-04 WRX or Sti for 3 midweek days towards the end of October (provisionally 26-28th)
Preferably modified with at least a full decat and maybe induction and/or turbo mods.
You receive from me ....
A free Tek 3 custom remap.
Before and after Dastek rolling road torque and power plots.
A guarantee that your car will be used but not abused and returned to you in the same condition it was left (except faster!)
It will be garaged overnight and fully insured throughout.
I am based near Edinburgh so it may be easier to have a local car, unless you fancy a midweek break in Scotland !
This will be offered on a first suitable car to register interest basis, ideally via posting here or via PM as I'm still working through my post honeymoon email backlog !
Andy
As a recent EcuTek distributor I wish to develop base maps for MY01-04 cars.
It was my original intention to buy my own bugeye to develop the maps, as I have previously done with the Apexi Power FC ECU on my own MY95 WRX and 99 Sti cars. The purchase has been put on hold temporarily but I don't want to delay EcuTek progress any longer.
I need from you ....
Your MY01-04 WRX or Sti for 3 midweek days towards the end of October (provisionally 26-28th)
Preferably modified with at least a full decat and maybe induction and/or turbo mods.
You receive from me ....
A free Tek 3 custom remap.
Before and after Dastek rolling road torque and power plots.
A guarantee that your car will be used but not abused and returned to you in the same condition it was left (except faster!)
It will be garaged overnight and fully insured throughout.
I am based near Edinburgh so it may be easier to have a local car, unless you fancy a midweek break in Scotland !
This will be offered on a first suitable car to register interest basis, ideally via posting here or via PM as I'm still working through my post honeymoon email backlog !
Andy
Former Sponsor
iTrader: (234)
Joined: Jan 2003
Posts: 14,406
Likes: 0
From: Over 500ft/lbs of torque @ just 1.1bar
How about a MY99 with:
FE-TD05
Ported Headers
2" H&S Uppipe
3" turbo-back exhaust
STi6 Intercooler
Exedy Organic Clutch
Lightened Flywheel
STi Panel Filter
Airbox mod
HKS SSQV
Walbro 255 Fuel Pump
FSE Fuel Pressure Reg
Knocklink
Lambdalink
Boost Gauge
Prime for you to work your magic on it!
Go on. Go on....pleeeeeeeaaaase?
FE-TD05
Ported Headers
2" H&S Uppipe
3" turbo-back exhaust
STi6 Intercooler
Exedy Organic Clutch
Lightened Flywheel
STi Panel Filter
Airbox mod
HKS SSQV
Walbro 255 Fuel Pump
FSE Fuel Pressure Reg
Knocklink
Lambdalink
Boost Gauge
Prime for you to work your magic on it!
Go on. Go on....pleeeeeeeaaaase?
Trending Topics
Version 7 Jap spec Import STI 2001 Bug eye.
1. 255 WALBRO FUEL PUMP
2. FSE FUEL PRESSURE REGULATOR
3. S/S Intake INDUCTION KIT
4. Greddy V-SPL Frount Mount Intercooler, with water spray.
5. MANIFOLD HEADERS S/S
6. UP PIPE S/S
7. TD05/6 TURBO
8. MAGNEX DOWN PIPE 3"
9. BLITZ NURSPEC EXHAUST 3"
10. STI 565cc injectors, pinks
11. NGK PFR7B PLUGS
12. Knocklink & Bosch sensor
13. Genome Defi boost, oil temp, water temp guage kit
14. GReddy Type-S BOV Kit:
15. Hybrid Oil Catch Tank
16. Lightened Pulley Kit, Unothrodox Racing
17. Everything heat wrapped with 1200 degree thermal insulation + thermocool bandage.
18. 3 port boost solenoid.
I'll have a go!!
1. 255 WALBRO FUEL PUMP
2. FSE FUEL PRESSURE REGULATOR
3. S/S Intake INDUCTION KIT
4. Greddy V-SPL Frount Mount Intercooler, with water spray.
5. MANIFOLD HEADERS S/S
6. UP PIPE S/S
7. TD05/6 TURBO
8. MAGNEX DOWN PIPE 3"
9. BLITZ NURSPEC EXHAUST 3"
10. STI 565cc injectors, pinks
11. NGK PFR7B PLUGS
12. Knocklink & Bosch sensor
13. Genome Defi boost, oil temp, water temp guage kit
14. GReddy Type-S BOV Kit:
15. Hybrid Oil Catch Tank
16. Lightened Pulley Kit, Unothrodox Racing
17. Everything heat wrapped with 1200 degree thermal insulation + thermocool bandage.
18. 3 port boost solenoid.
I'll have a go!!
Scooby Regular
Joined: Jul 2003
Posts: 5,734
Likes: 0
From: Behind the wheel of a Time Attack R33 GTR
wish i could.....mine is in dire need of mapping having had all the bits fitted on friday....
new turbo, pump, full decat on an 03 WRX.
Currently limited to bugger all boost.
new turbo, pump, full decat on an 03 WRX.Currently limited to bugger all boost.
I wish i read more into it last night when you was giving me advice on my AFR's-I did wonder why you said "free TEK3 remap",i just thought you was referring to my "free airbox mod"
Last edited by easyrider; Oct 4, 2004 at 07:53 PM.
Originally Posted by Andy.F
Sorry guys, I don't need any other cars at the moment.
Thanks for all the PM's
Andy
Thanks for all the PM's
Andy
Andy,
can you pm me details of remap you offer for jdm sti 8/ 9 as that is my next mod and i would like you to do it if you could.
cheers
andy
Scooby Regular
Joined: Dec 2002
Posts: 198
Likes: 0
From: Sunny Dubai, epicentre of the shallow people
Ricey - Make sure he does a good job, I don't want to fly Andy out here if your car turns into a pile o' ****e 
Andy - if you would like to refine your skills in some higher ambients (and straighter roads with cheaper petrol!) maybe we can re-adjust your pricing offer!

Andy - if you would like to refine your skills in some higher ambients (and straighter roads with cheaper petrol!) maybe we can re-adjust your pricing offer!
Thread
Thread Starter
Forum
Replies
Last Post




Except they never did a 2 door bug, so I dont think I could get away with it
