NelsonUK

I have purchased the Recirc adaptor for the MY00 HKS SQV. However I don't have any pipework that will connect the end of the D/V to the intake path ?? Anyone else sorted this problem ??

NelsonUK

Anyone else converted their SQV to Recirc on a MY99/00 ??

marklemac

I didn't think a re-circ was available ?

Can you post a picture please ?

ticky

marklemac YHM

marklemac

Right, have now got my adaptor and am too stuck with how to get the pipework to fit.

Obviously I am going to need a hose a few inches long, one end to fit onto the new recirc adaptor and am going to need some sort of adaptor to fit into the existing hose....

RB5_245

the adapter fits on to the valve it's self once you have remove the silver noise making three spoke insert. take the cover off with the 6allen screws then remove the insert, replace with the re-circ insert and you're off. 3allen screws hold the insert in place and three hold the cover in place.

Then I'd remove the mounting bracket and turn the dv so it faces the other way. Then remove the bung from the re-circ hose (which was fitted when installing the sqv), this should be well hidden and awkward to get to under the intercooler by now. The re-circ hose should fit directly on to the insert and can be tightened with a jubilee clip.

Dave.

marklemac

Dave,

I don't understand the 'turn the dv so it faces the other way'.

The outlet is facing to the left and the re-circ hose is below that to the left slightly.

Without an additional hose I can't see how it could connect to the existing re-circ hose.