Exhaust sounds load and choppy
26 April 2004, 09:23 AM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2004
Posts: 230
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust sounds loud and choppy
Hi all
The Exhaust on MY94 WRX sound to loud and the sounds a bit choppy. I have had a look and it doesn't seem to be blowing anywhere.
Any Ideas?
The Exhaust on MY94 WRX sound to loud and the sounds a bit choppy. I have had a look and it doesn't seem to be blowing anywhere.
Any Ideas?
Last edited by D4V3; 26 April 2004 at 09:41 AM.
26 April 2004, 11:23 AM
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
check it is all done up tight at all the joins..
turbo to downpipe, downpipe to centre, centre to back box..
Headers to engine and headers to uppipe etc..
JGM
turbo to downpipe, downpipe to centre, centre to back box..
Headers to engine and headers to uppipe etc..
JGM
26 April 2004, 11:51 AM
#3
Scooby Senior
Join Date: Oct 2001
Posts: 2,602
Likes: 0
Received 0 Likes
on
0 Posts
Tell-tale soot deposits are a good thing to look for 
The bits that JGM says, and also around any plugs/bungs that may be in the exhaust system, depending on what system you have...
The bits that JGM says, and also around any plugs/bungs that may be in the exhaust system, depending on what system you have...
27 April 2004, 01:18 PM
#5
Scooby Regular
Join Date: Aug 2001
Location: Warrington
Posts: 4,554
Likes: 0
Received 0 Likes
on
0 Posts
You could try covering the tailpipe and seeing if the increased back pressure shows anything. Check the rubbers, and that nothing is touching.
Or wait for a cold morning and look for clouds of steam escaping.
Or wait for a cold morning and look for clouds of steam escaping.
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
