chip01

I keep getting a clicking noise from the cluch when changing gear, it feels like it is just before the cluch is depressed any ideas cheers chip

scoobyslut

it is the pedal pivot bush.

You can try greasing the bush to keep it quiet, but be prepared to do so on a regular basis as it does dry out due to heat through the bulkhead.
Aerosol spray is a quick 2 day fix but dont last much longer, needs more attention than that.

chip01

what can I do to sort it perminently, if not will WD40 do or some engine oil

scoobyslut

Like I said, try grease on the pivot , you will need to slide the pivot pin out slightly, then apply the grease to it.

Gidney&Knowlesy

The pivot pin wears & goes oval, new pin will sort it, grease will work for a while...

andypugh2000

same problem here, comes and goes when it likes