To all those who answered my Legacy Exhaust posts!
#1
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: Leeds
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
the Legacy 93-95 SALOON does not share the same exhaust as the Impreza.
The centre is longer by couple of inches and the placement of the hangers corresponds with that extra length.
The backbox is also longer by a few inches, the hangers seem to fit if the pipe is lengthend, however if the hangers are changed then the exit tail pipe will be too short!
Additionally the flange on the backbox is a slightly smaller diamiter on the Legacy, which means the impreza flange bolt holes need to be extended inwards (made larger). This also applies to the gasket.
Therefore a reducer pipe needs to be added to an Impreza backbox with a legacy flange.
In Conclusion - I have twice now bought impreza exhaust parts asking first if these will fit and both times have been told they will
however they dont!
The only common exhaust component is the downpipe!
Try not to reply to this by saying *I KNEW THAT* as you didnt say it then and now its not helpful.
Thought id write this down in order to help the other fellow Legacy owners.
The centre is longer by couple of inches and the placement of the hangers corresponds with that extra length.
The backbox is also longer by a few inches, the hangers seem to fit if the pipe is lengthend, however if the hangers are changed then the exit tail pipe will be too short!
Additionally the flange on the backbox is a slightly smaller diamiter on the Legacy, which means the impreza flange bolt holes need to be extended inwards (made larger). This also applies to the gasket.
Therefore a reducer pipe needs to be added to an Impreza backbox with a legacy flange.
In Conclusion - I have twice now bought impreza exhaust parts asking first if these will fit and both times have been told they will
however they dont!
The only common exhaust component is the downpipe!
Try not to reply to this by saying *I KNEW THAT* as you didnt say it then and now its not helpful.
Thought id write this down in order to help the other fellow Legacy owners.
#2
\m/ ^_^ \m/
ah, didn't know about the flange problem because i fitted a complete impreza system - i wouldn't worry about it being too short as long as it does it's job
#3
Scooby Regular
Join Date: Dec 2001
Location: Netherlands & Nürburgring
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
As long as you extend the centre pipe with 60 mm just after where it bolts up to the down pipe, the centre section is OK, and then modify the hangers of the back box, then you're in business. Done it three times now, no problems. If you want you can extend the tail pipe by welding slightly bigger diameter pipe on the stock pipes. Looks better too.
#4
actually the question was back box that I saw.
There are differences in both, centre is correct fitment if you add 60 or so mm to portion just after forward flange. I originally thought they were "about" the same based on offering it up at the side of the car on the ground. A trip to hayward and scott let me see the exact difference.
The back box tailpipe is longer on legacy, moreso on estate, and the hangers are different too. Not sure how different I only know that the impreza back box I've got had its hangers cut off and renewed, tail pipe cut off and renewed and front pipe cut and reset.
Paul
There are differences in both, centre is correct fitment if you add 60 or so mm to portion just after forward flange. I originally thought they were "about" the same based on offering it up at the side of the car on the ground. A trip to hayward and scott let me see the exact difference.
The back box tailpipe is longer on legacy, moreso on estate, and the hangers are different too. Not sure how different I only know that the impreza back box I've got had its hangers cut off and renewed, tail pipe cut off and renewed and front pipe cut and reset.
Paul
#5
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: Leeds
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
After thinking about this, i recon that if i make up a 60mm or so pipe with a stanndard flange at each end, mod one side to bring the bolt holes closer together.
Then i think an impreza backbox with its original hangers will fit.???????
Gonna ask H and S is they can do something.
I can see how the legacy exhaust catches people out, as by looking at it, it seems an identical shape, join and length!
The backbox post was recent, however i had a similar post for the center section in april. which concluded the same way.
Then i think an impreza backbox with its original hangers will fit.???????
Gonna ask H and S is they can do something.
I can see how the legacy exhaust catches people out, as by looking at it, it seems an identical shape, join and length!
The backbox post was recent, however i had a similar post for the center section in april. which concluded the same way.
#7
i really dont understand the point of this thread,you state that youve had bad advice from the board.you now know the legacy/impreza exhausts may need a little modification to fit,but,any one using search will never get pointed to this thread,as your title is too ambiguous
Trending Topics
#11
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
care3,
i dont understand the point of your post, yet I do understand what dan is saying, despite having pointed this out..
like he said the point is that someone read it.. and the information is 'stored' somewhere..
And I wouldnt call it a search facility.. rather a random query generator.
i dont understand the point of your post, yet I do understand what dan is saying, despite having pointed this out..
like he said the point is that someone read it.. and the information is 'stored' somewhere..
And I wouldnt call it a search facility.. rather a random query generator.
#12
david
search works fine for me
e.g. i just entered this 'do legacy exhausts fit impreza'
and this pops uphttp://www.scoobynet.co.uk/bbs/threa...hreadID=167471
however this particular thread didnt pop up,i wonder why?
that was my point
search works fine for me
e.g. i just entered this 'do legacy exhausts fit impreza'
and this pops uphttp://www.scoobynet.co.uk/bbs/threa...hreadID=167471
however this particular thread didnt pop up,i wonder why?
that was my point
#13
Scooby Regular
iTrader: (2)
Join Date: May 2000
Location: Class record holder at Pembrey Llandow Goodwood MIRA Hethel Blyton Curborough Lydden and Snetterton
Posts: 8,626
Likes: 0
Received 0 Likes
on
0 Posts
If you had put "Legacy exhaust fit" into the search rather than "ooh, I wonder if one of those legacy exhausts is of the precise fitment dimensions as an impreza" you would had had more luck
#14
it was magnet's reply to my post about a week or so ago that saved me a lot of messing around, after borrowing an impreza centre section for my mot believing it to be the same fitment as my legacy, so thanks again for that dan
ian
ian
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
trapper2013
ScoobyNet General
6
30 October 2015 03:10 PM