Aquamist 2d: injector connections?
#1
Hello, anyone out there who has fitted one of these things?
I think I've worked where all the (vast number) of different cables go, except for the two to do with the info from the injectors, i.e. the red & green cables from the thing that looks like a serial D-connector that plugs into the FiA2 box, for anyone who has the diagram that comes with the seriously comprehensive bits of kit...
The drivel:
Eh?
I've poked about in the ever useful PossumLink V5 manual (it's for an MY00) & can find lots of injector things (well, 4...) but have no idea about all this non-switched pulsing stuff
Any help?
[Edited by nom - 11/30/2003 3:53:44 PM]
I think I've worked where all the (vast number) of different cables go, except for the two to do with the info from the injectors, i.e. the red & green cables from the thing that looks like a serial D-connector that plugs into the FiA2 box, for anyone who has the diagram that comes with the seriously comprehensive bits of kit...
The drivel:
IMPORTANT:
Great care must be taken that the Red Wire from the 806-441 amplifier must be connected to the non-switched side of the injector driving wire. If there is an inline power resistor used on the original loom, please splice the red wire to the ECU side of the driving wire. The green wire from the 806-441 splices into the "Pulsed" or the side of the injector driving wire.
Great care must be taken that the Red Wire from the 806-441 amplifier must be connected to the non-switched side of the injector driving wire. If there is an inline power resistor used on the original loom, please splice the red wire to the ECU side of the driving wire. The green wire from the 806-441 splices into the "Pulsed" or the side of the injector driving wire.
I've poked about in the ever useful PossumLink V5 manual (it's for an MY00) & can find lots of injector things (well, 4...) but have no idea about all this non-switched pulsing stuff
Any help?
[Edited by nom - 11/30/2003 3:53:44 PM]
#2
Drag it!
iTrader: (1)
Join Date: Jun 2002
Location: Flame grilled Wagon anyone?
Posts: 9,866
Likes: 0
Received 0 Likes
on
0 Posts
what fun i had doing this, this should help
http://www.scoobynet.co.uk/bbs/threa...hreadID=217012
steven
http://www.scoobynet.co.uk/bbs/threa...hreadID=217012
steven
#3
Thanks Steven - I thought you had one of these!
Well, I'll see how it goes... don't think I'm going to try any of John's esoteric ideas though - I'm sure I'd just blow something up
Well, I'll see how it goes... don't think I'm going to try any of John's esoteric ideas though - I'm sure I'd just blow something up
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM