Anyone fitted a swirl pot and HP pump?
#1
Scooby Regular
Thread Starter
Join Date: May 2003
Location: Bracknell
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone fitted one of these on a subaru? If so, where was it mounted and what kind of job was the wiring? I presume it needs a positive feed from the battery and maybe some wires need splicing from the fuel pump?
Please help me............
Please help me............
#2
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Hp as in high pressure?
what spec car..
Yes I used a swirl pot pedal bin sort of sized
Two bosch pumps (same as group a spec.. Can arrange supply cheaper than most!) two walbaro 255lph fuel pumps in tank as lift pumps.. god knows what flow with no load /pressure..
David
what spec car..
Yes I used a swirl pot pedal bin sort of sized
Two bosch pumps (same as group a spec.. Can arrange supply cheaper than most!) two walbaro 255lph fuel pumps in tank as lift pumps.. god knows what flow with no load /pressure..
David
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
Matt_182
Wheels, Tyres & Brakes
19
07 October 2015 01:05 PM
DogsofWar
Engine Management and ECU Remapping
16
23 September 2015 07:41 PM