DET with tek 2.5?
#1
MY99,with a tek '2.5' D/P, and run with Optimax. When first installed, no matter what I did, I simply didn't get any knocklink activity. Just recently I've noticed that at around 5K I get a run of upto and including orange led's. This doesn't happen every time but appears to occur when I get back on the throttle after a gear change and before I reach WOT, ie, as I depress the throttle. On a recent occassion this happened as i reached an open section of road after having been in a stream of traffic travelling at a constant 35mph, ambient temp, say 22degrees. What can I check for and what is going on?
Car idles fine and has std induction.Optimax from various garages
thanks
Justin
Car idles fine and has std induction.Optimax from various garages
thanks
Justin
#2
Scooby Regular
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
Suspect you might have a failing MAF sensor, there are other causes but this is a common one. You need to get it logged with Delta Dash and see how much knock correction it is running amongst other checks.
[Edited by john banks - 9/5/2003 9:36:29 PM]
[Edited by john banks - 9/5/2003 9:36:29 PM]
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM