Fitting Mongoose....what do I need to know??
18 August 2003, 12:57 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2003
Location: Ayrshire
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Feeling confident 
, so I am going to be self-fitting a Mongoose turbo-back system to a UK spec 1999T reg. What do I need to know, particularly with regards to the lambda sensors etc. Have fitted many many exhausts in the past, but not turbo backs.
Thanks!!
, so I am going to be self-fitting a Mongoose turbo-back system to a UK spec 1999T reg. What do I need to know, particularly with regards to the lambda sensors etc. Have fitted many many exhausts in the past, but not turbo backs.Thanks!!
18 August 2003, 10:57 PM
#2
Scooby Regular
Join Date: May 2001
Posts: 449
Likes: 0
Received 0 Likes
on
0 Posts
Its probably seized
Seriously - apply liberal amounts of wd40 to both the sensor threads and the nuts securing the old downpipe to the turbo a couple of hours before removing.
Other than that its straight forward.
Rich
Seriously - apply liberal amounts of wd40 to both the sensor threads and the nuts securing the old downpipe to the turbo a couple of hours before removing.
Other than that its straight forward.
Rich
20 August 2003, 01:14 PM
#5
Scooby Regular
Join Date: Apr 1999
Posts: 82
Likes: 0
Received 0 Likes
on
0 Posts
I had a mongoose already fitted when I bought my legacy (excellent deep sound btw) - it had fitment for the lambda sensor in the top of the downpipe.
Should be the same with yours.
Rich
Should be the same with yours.
Rich
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM