Need to mod my heatshield - Help please?
#1
Scooby Regular
Thread Starter
Here are a few pics
As you can see the heatshield looks almost unmodified
What I did was just cut the back off from the join down, so the top part remains unmodified, and on the bottom part only the side remains, so it could still have some extra bolts
Hope this helps
Cheers
Steve
[Edited by *Sonic* - 8/2/2003 6:05:04 PM]
As you can see the heatshield looks almost unmodified
What I did was just cut the back off from the join down, so the top part remains unmodified, and on the bottom part only the side remains, so it could still have some extra bolts
Hope this helps
Cheers
Steve
[Edited by *Sonic* - 8/2/2003 6:05:04 PM]
#2
Scooby Regular
Join Date: Jan 2001
Location: Warwickshire
Posts: 2,028
Likes: 0
Received 0 Likes
on
0 Posts
I've just fitted an open neck Hayward and Scott downpipe to my Impreza. I was told I need to mod the heatshield to get it back on the car but I don't know how much to cut off/bend or which bits.
Has anyone done this already and also has anyone got any pics of a modded heatshield. I tried the search but the links are that old the pics have long gone.
Any help would be appreciated
Has anyone done this already and also has anyone got any pics of a modded heatshield. I tried the search but the links are that old the pics have long gone.
Any help would be appreciated
#5
Scooby Regular
Thread Starter
Nice one
its weird, as I get no bangs or knocks from the DP, and I didnt fit a new bracket either, just bolted it straight on
What I did notice, was that the DP fits very very snug against the arm the OE DP fitted to on the gearbox
P1's must be slightly different than Std UK cars
When you had the DP fitted, what centre section was on yours at the time, mine was a Magnex centre
Steve
its weird, as I get no bangs or knocks from the DP, and I didnt fit a new bracket either, just bolted it straight on
What I did notice, was that the DP fits very very snug against the arm the OE DP fitted to on the gearbox
P1's must be slightly different than Std UK cars
When you had the DP fitted, what centre section was on yours at the time, mine was a Magnex centre
Steve
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM