Notices
Drivetrain Gearbox, Diffs & Driveshafts etc

Help please

Thread Tools
 
Search this Thread
 
Old Jul 15, 2003 | 11:07 AM
  #1  
neilp's Avatar
neilp
Thread Starter
Scooby Regular
 
Joined: May 2002
Posts: 94
Likes: 0
Post

Hi,
Recently had the following done :
AP monster brake kit and decatted down pipe fitted
Needed spacers to the wheels as the wheels (18"OZ super leggerra's) wouldn't fit back on.
I am now getting horrible judder on the steering column and a grinding noise when left cornering, had the wheels re-balanced and a general look around and still have this, anyone any ideas
Car is a my98 wrx import
Reply
Old Jul 15, 2003 | 04:44 PM
  #2  
Dyney's Avatar
Dyney
Scooby Regular
 
Joined: Jan 2001
Posts: 6,812
Likes: 1
From: West Sussex
Red face

Have you checked the tyres aren't rubbing on anything?
Reply
Old Jul 17, 2003 | 02:15 PM
  #3  
neilp's Avatar
neilp
Thread Starter
Scooby Regular
 
Joined: May 2002
Posts: 94
Likes: 0
Post

Well the saga continues, looks like it's the tyre unfortunately I found out travelling @ 80mph on the M56 in the outside lane when it let go, fortunately it was quiet so managed to miss everything as i quickly got dragged to the left hand side of the road. The garage looking very sheepish now have my car back and are looking at why a 2 week old tyre would go pop!
Reply
Old Jul 18, 2003 | 12:20 PM
  #4  
WR-MIKE's Avatar
WR-MIKE
Scooby Regular
 
Joined: Jul 2002
Posts: 195
Likes: 0
Post

which dp have you had fitted ? reason I ask is when I replaced my std dp with a twin dump scoobymania dp the UJ on the steering column was fouling the wastegate pipe but only when going round left hand bends / corners under load. It took me ages to suss it out.
Hope this helps, Mike.
Reply
Old Jul 18, 2003 | 04:00 PM
  #5  
Jolly Green Monster's Avatar
Jolly Green Monster
Former Sponsor
iTrader: (4)
 
Joined: Jan 2001
Posts: 16,548
Likes: 2
From: ECU Mapping - www.JollyGreenMonster.co.uk
Post

Is that the 6pot AP's?? didn't think spacers were needed!!?!

What tyres size you running??

JGM
Reply
Old Jul 22, 2003 | 04:35 PM
  #6  
neilp's Avatar
neilp
Thread Starter
Scooby Regular
 
Joined: May 2002
Posts: 94
Likes: 0
Post

JGM the AP's are monster kit 6 pot, disks are 360mm!!! and the calipers a fcukin huge also will post a pic up some day never seen such a massive kit b4
The problem still is there after a new tyre, going to take the wheel off and have a good look around thanks for the info on the downpipe will look into it, the dp is a hyper one (made for a local performance racing place near Bolton)


neilp
Reply




All times are GMT +1. The time now is 07:12 AM.