MY93 owners - help please
27 June 2003, 02:32 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2003
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
does anyone know where the cam position sensor, knock sensor and relief solonoid plugs are on the loom??
im in the middle of a conversion and i have lost them
any help would be appreciated
im in the middle of a conversion and i have lost them
any help would be appreciated
27 June 2003, 02:49 PM
#2
Scooby Regular
Join Date: Mar 2002
Location: Fcon Power Writer
Posts: 4,338
Likes: 0
Received 0 Likes
on
0 Posts
They are on a seperate loom to the main engine loom, they come directly from the ecu rather than the multiplugs near the battery.
They normally come out by the bell housing on the gear box.
Rob
They normally come out by the bell housing on the gear box.
Rob
27 June 2003, 03:00 PM
#3
Scooby Regular
Thread Starter
Join Date: Feb 2003
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
thats what i thought, i see them there but wasnt 100% sure.
one thing tho, i know the single wire is for the crank sensor, but i now got two 3 wire plugs, and two 2 wire sensors. the plugs are white and grey, do you know which is which?? im gonna have a look at some MY93 sensors and see if they are 3 wire aswell...
one other thing, the late crank sensor is 2 wire, the early one is single wire. is the early one earthed through the block?? if so, which side of the CPS is earth??
one thing tho, i know the single wire is for the crank sensor, but i now got two 3 wire plugs, and two 2 wire sensors. the plugs are white and grey, do you know which is which?? im gonna have a look at some MY93 sensors and see if they are 3 wire aswell...
one other thing, the late crank sensor is 2 wire, the early one is single wire. is the early one earthed through the block?? if so, which side of the CPS is earth??
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM