DEGLAZE OR REBORE
22 May 2003, 07:02 PM
#1
Scooby Regular
Thread Starter
Join Date: Apr 2003
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
As above. My93 wrx engine is currently in bits and was looking for advice. Pistons,piston rings and cylinder bores are worn and the engine has done high miles. So do I increase my overdraft a little or a lot
how much would i be looking at for new pistons and would there be any other modifications needed. KARL
how much would i be looking at for new pistons and would there be any other modifications needed. KARL
22 May 2003, 08:32 PM
#2
If you're getting brand new pistons then rebore +0.25mm
But I would get the bores checked out properly, as you may be able to get away with a hone and a std set of pistons.
If you're short of money, you should consider a used shortblock or complete engine. Or if you want uprated parts such as forged pistons and rods, that's a new ballgame.
Do you have a budget for the cost and idea of what you want to do (if anyhting) power wise?
Paul
But I would get the bores checked out properly, as you may be able to get away with a hone and a std set of pistons.
If you're short of money, you should consider a used shortblock or complete engine. Or if you want uprated parts such as forged pistons and rods, that's a new ballgame.
Do you have a budget for the cost and idea of what you want to do (if anyhting) power wise?
Paul
Thread
Thread Starter
Forum
Replies
Last Post
