Downpipes - Scoobysport - H&S - Jap Inovations
#1
Scooby Regular
Thread Starter
Join Date: Jan 2001
Location: Warwickshire
Posts: 2,028
Likes: 0
Received 0 Likes
on
0 Posts
I'm going to take the plunge and order a new decat downpipe this week coming. I've finally decided to go for an open neck one after all the searching and what not (wanted a BPM twin but too much!).
So now I find there are 3 makes, which one is better for me? I want more noise if I can, it'll be going on a HKS Hiper mid and backbox. So once again, criteria are....
1). 3" bore right through.
2). Loud.
3). Must mate up to a HKS system.
4). Don't really want to cut the heat shield but will lag pipe anyway if I need to leave the hs off.
Any advice greatly appriciated..
So now I find there are 3 makes, which one is better for me? I want more noise if I can, it'll be going on a HKS Hiper mid and backbox. So once again, criteria are....
1). 3" bore right through.
2). Loud.
3). Must mate up to a HKS system.
4). Don't really want to cut the heat shield but will lag pipe anyway if I need to leave the hs off.
Any advice greatly appriciated..
#5
Scooby Regular
Thread Starter
Join Date: Jan 2001
Location: Warwickshire
Posts: 2,028
Likes: 0
Received 0 Likes
on
0 Posts
It's going to go on a P1 but not until a TEK3 remap, just getting the parts together, this and the APS air intake from JWRacing.
Cheers for the offer Tim but i think you're about 1 1/2 hrs drive away from me. I'm based in Rugby.
Originally thought the H&S one as well, just wondered if the other options were worth thinking about. Didn't even know TSL did one, I'll take a quick peek at that to.
Cheers for the offer Tim but i think you're about 1 1/2 hrs drive away from me. I'm based in Rugby.
Originally thought the H&S one as well, just wondered if the other options were worth thinking about. Didn't even know TSL did one, I'll take a quick peek at that to.
#7
Scooby Regular
Thread Starter
Join Date: Jan 2001
Location: Warwickshire
Posts: 2,028
Likes: 0
Received 0 Likes
on
0 Posts
Cheers BL, but I've just sold a HKS downpipe to make way for a less restrictive one for the amount of power gain I require
Oh my HKS was a 3" straight through downpipe, what's a HKS Hi Flow Downpipe? Says it's duel entry?
[Edited by Mickle - 3/23/2003 1:08:58 PM]
Oh my HKS was a 3" straight through downpipe, what's a HKS Hi Flow Downpipe? Says it's duel entry?
[Edited by Mickle - 3/23/2003 1:08:58 PM]
Trending Topics
#10
hiya m8,
I had a scoobysport (H&S) old style one.. very nice, loud and some good power.. (plus helped my p1 get approx 320bhp with Tek3,aps induction, full decat)
one word of warning though, is make sure whichever downpipe you get, make sure it has the "o" ring/flange where it connects to the centre pipe, I had a problem with mine, and had to get a new "o" ring fitted by PE.. oh yes, their downpipe is highly rated too (part of the T75 kit no connections to PE, other than a satisfied customer..
cheers
Tin
I had a scoobysport (H&S) old style one.. very nice, loud and some good power.. (plus helped my p1 get approx 320bhp with Tek3,aps induction, full decat)
one word of warning though, is make sure whichever downpipe you get, make sure it has the "o" ring/flange where it connects to the centre pipe, I had a problem with mine, and had to get a new "o" ring fitted by PE.. oh yes, their downpipe is highly rated too (part of the T75 kit no connections to PE, other than a satisfied customer..
cheers
Tin
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM