decat =remap?
#1
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: Denmark
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
WRX MY01
ITG and Magnex decat from turbo back. Also took all the plastic away before the airfilter. Fitted short alupipe into the fender.
Do I need more fuel in there? uprated pump? regulator? injectors?
Do I need a remap?
What if I fit an up-pipe and port the manifolds?
Anything else for safety? No rubber jokes please
Thanks guys
Claus
ITG and Magnex decat from turbo back. Also took all the plastic away before the airfilter. Fitted short alupipe into the fender.
Do I need more fuel in there? uprated pump? regulator? injectors?
Do I need a remap?
What if I fit an up-pipe and port the manifolds?
Anything else for safety? No rubber jokes please
Thanks guys
Claus
#3
Scooby Regular
Join Date: Jun 2002
Location: From Kent to Gloucestershire to Berkshire
Posts: 2,905
Likes: 0
Received 0 Likes
on
0 Posts
I believe it is widely accepted that the MAF sensor can work its way round that level of mods on a bugeye, even including the up-pipe and ported headers. Stick to decent fuel (higher RON the better), and I believe you won't have any problems. Having said that, you'll enjoy a remap if you can do it!
Pump, regulator and injectors are well up to the job until about 300bhp or maybe a bit more. With exhaust, up-pipe, headers etc plus a remap, I was getting 284bhp and still had some spare capacity looking at my injector duty cycle.
Edit to ask - did you find much benefit from changing the inlet resonator to aluminium pipe? Any increased noise?
[Edited by hades - 3/16/2003 12:13:04 AM]
Pump, regulator and injectors are well up to the job until about 300bhp or maybe a bit more. With exhaust, up-pipe, headers etc plus a remap, I was getting 284bhp and still had some spare capacity looking at my injector duty cycle.
Edit to ask - did you find much benefit from changing the inlet resonator to aluminium pipe? Any increased noise?
[Edited by hades - 3/16/2003 12:13:04 AM]
Thread
Thread Starter
Forum
Replies
Last Post
fatboy_coach
General Technical
15
18 June 2016 03:48 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM