Overboost with no mods!
31 January 2003, 03:43 PM
#1
Scooby Regular
Thread Starter
Join Date: Jun 2000
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Is this bad?
I previously only got overboost on my MY95 WRX saloon following exhaust and induction kit mods. This was cured with a Unichip.
Is there anything I can do to stop it happening to this MY94 WRX wagon without resorting to a different ECU.
Why would this happen if the car is standard?
Ben
I previously only got overboost on my MY95 WRX saloon following exhaust and induction kit mods. This was cured with a Unichip.
Is there anything I can do to stop it happening to this MY94 WRX wagon without resorting to a different ECU.
Why would this happen if the car is standard?
Ben
02 February 2003, 02:03 AM
#4
Scooby Regular
Join Date: Jul 2002
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
too much oil in the engine, check the dipstick; There are three marks on it low-full-full when hot. When you engine is cold it may not go upon the full mark !!!
Clean the solenoid, problem solved .
Wally
Clean the solenoid, problem solved .
Wally
Trending Topics
07 February 2003, 11:06 AM
#9
Scooby Regular
Thread Starter
Join Date: Jun 2000
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
Cleaned the solenoid and still have the problem in every gear except first although its ok once I get over 5000 rpm
Will check for loose/cracked boost pipe - anything else I could try?
Ben
Will check for loose/cracked boost pipe - anything else I could try?
Ben
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM