What MAP voltage for boost cut?
#2
Scooby Regular
Join Date: Nov 2000
Location: 32 cylinders and many cats
Posts: 18,658
Likes: 0
Received 1 Like
on
1 Post
It is at 17.6 PSI.
0 bar is about 2.3 V and 1.8 bar is about 4.84V.
So I reckon you are looking at 4.0 V on the nose. I used a FCD from about 3.8 V with success.
If you are wanting to influence closed loop boost control defend from a bit lower.
0 bar is about 2.3 V and 1.8 bar is about 4.84V.
So I reckon you are looking at 4.0 V on the nose. I used a FCD from about 3.8 V with success.
If you are wanting to influence closed loop boost control defend from a bit lower.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM