Dawes with Tek - FAO Kenny(Saxoboy)
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: Stirling
Posts: 2,168
Likes: 0
Received 0 Likes
on
0 Posts
Ordered another Dawes from Jamie and going to set it up with my Tek.
Kenny - what boost are you running this now? (I think our cars are the same - Tek3 with decat centre) is it 17.5?
Cheers
Richard.
Kenny - what boost are you running this now? (I think our cars are the same - Tek3 with decat centre) is it 17.5?
Cheers
Richard.
#2
Don't think SB has taken the plunge yet with the Tek3.
I've got a similar set up to you though and can run safely with about 1.2/1.3bar boost in the cold weather if this helps.
Would recommend having another session with John to remap with the Dawes, as it's a better Boost Controller than the ECU.
[Edited by Devil's Refugee - 9/26/2002 9:45:58 AM]
I've got a similar set up to you though and can run safely with about 1.2/1.3bar boost in the cold weather if this helps.
Would recommend having another session with John to remap with the Dawes, as it's a better Boost Controller than the ECU.
[Edited by Devil's Refugee - 9/26/2002 9:45:58 AM]
#3
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Apr 2001
Location: Stirling
Posts: 2,168
Likes: 0
Received 0 Likes
on
0 Posts
Cheers mate
I'll have to speak nicely with John
I was running 16.5 previously with the Dawes but with the fuel cut lifted then I'm keen to run 17.5 - 18 PSI - fueling allowing of course.
Richard.
I'll have to speak nicely with John
I was running 16.5 previously with the Dawes but with the fuel cut lifted then I'm keen to run 17.5 - 18 PSI - fueling allowing of course.
Richard.
#6
Scooby Regular
Join Date: Mar 2002
Location: Bradford
Posts: 13,720
Likes: 0
Received 0 Likes
on
0 Posts
Do I/don't I have Tek3.......course I do
With just the centre cat John has advised me not to run any more than 1.21 bar. With full decat this can probably be stretched to about 1.25bar. You probably could run at 1.25bar now as we all know John builds in a margin for error......but......he does that IMO for a reason!!! Besides, I'm running 1.2bar at the moment and it's pretty quick. Can't be bothered faffing around to try and find my extra 0.01
With just the centre cat John has advised me not to run any more than 1.21 bar. With full decat this can probably be stretched to about 1.25bar. You probably could run at 1.25bar now as we all know John builds in a margin for error......but......he does that IMO for a reason!!! Besides, I'm running 1.2bar at the moment and it's pretty quick. Can't be bothered faffing around to try and find my extra 0.01
Trending Topics
#10
Scooby Regular
Join Date: May 2001
Location: Scotland
Posts: 4,580
Likes: 0
Received 0 Likes
on
0 Posts
#13
Scooby Regular
Join Date: May 2001
Location: Scotland
Posts: 4,580
Likes: 0
Received 0 Likes
on
0 Posts
The fun stuff link is also good
The Pig Latin translation cracks me up
http://www.onlineconversion.com/funstuff.htm
The Pig Latin translation cracks me up
http://www.onlineconversion.com/funstuff.htm
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM