WRX Front CV drive shaft question/advice
#1
Scooby Regular
Thread Starter
iTrader: (3)
Join Date: Mar 2008
Location: Berkshire
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
WRX Front CV drive shaft question/advice
Hello - I have a 2003 WRX where the front passenger side control arm has failed. I am replacing the control arm but an additional problem is that the drive shaft CV joint nearest the gearbox has come apart.
I have the drive shaft disconnected from the gearbox (but not from the wheel end yet). Looking at the larger end nearest the gearbox with the rubber boot removed - the three bearing assembly has come out of the green drive coupling that splines onto the gearbox shaft. There is a fairly mangled 'O' ring that has come loose.
I'm wondering if it's best to try and repair this or source a second hand one. As I've never had this issue before, advice would be welcome :-)
Thanks !
I have the drive shaft disconnected from the gearbox (but not from the wheel end yet). Looking at the larger end nearest the gearbox with the rubber boot removed - the three bearing assembly has come out of the green drive coupling that splines onto the gearbox shaft. There is a fairly mangled 'O' ring that has come loose.
I'm wondering if it's best to try and repair this or source a second hand one. As I've never had this issue before, advice would be welcome :-)
Thanks !
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM