check engine light??
#1
Former Sponsor
Thread Starter
Join Date: Sep 2000
Location: www.scoobyworld.co.uk
Posts: 1,987
Likes: 0
Received 0 Likes
on
0 Posts
I had the "check engine" light appear for about a minute or so on my MY00 Impreza Turbo (UK spec) during my drive from home back to work (5 mins worth).
It went off after about a minute of being on and stayed off. the car is very low on fuel (petrol warning light just come on) and I was driving at around 2.5k rpm (not thrashing it as it wasnt warmed up)
The cars standard apart from a Magnex back box and ITG
Any ideas?
Neil
It went off after about a minute of being on and stayed off. the car is very low on fuel (petrol warning light just come on) and I was driving at around 2.5k rpm (not thrashing it as it wasnt warmed up)
The cars standard apart from a Magnex back box and ITG
Any ideas?
Neil
#4
Scooby Regular
Neil,
Connect the two BLACK cables under the steering column together and turn the ignition on (don't start the engine).
It should flash what the error code was - long and short flashes.
If it's 32 for example, it'll flash 3 long and 2 short, then it'll repeat the code.
Have a look here to see what the code is
Reading ECU codes
Stefan
Connect the two BLACK cables under the steering column together and turn the ignition on (don't start the engine).
It should flash what the error code was - long and short flashes.
If it's 32 for example, it'll flash 3 long and 2 short, then it'll repeat the code.
Have a look here to see what the code is
Reading ECU codes
Stefan
Thread
Thread Starter
Forum
Replies
Last Post
charlesr
General Technical
9
28 September 2015 09:16 AM
TylerD529
Lighting and Other Electrical
5
20 September 2015 12:10 PM