How much should a garage charge to fit the following mods?
#1
How much should a garage charge to fit the following mods?
Got a new turbo, 550cc injectors and a uprated fuel pump to be fitted, how much roughly should a garage charge to get these fitted and how long would a job like this take to fit, as i need the following fitted and just wanted to know what to expect to pay and how long it should take. Thanks
#2
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
I take it your not including the remap in that then? which if you are would be around 800 quid (actually you NEED to remap it to get it to work properly).
The rest would depend on how much per hour the labour costs were.
Oh you never said what MY it was???
Tony
The rest would depend on how much per hour the labour costs were.
Oh you never said what MY it was???
Tony
#4
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
I wouldnt have thought much over 8 hours labour for all the work, say at 50 quid per hour as an average rate... 400 quid give or take an hour or two.
Tony
PS, why dont you get it fitted at TSL???
Tony
PS, why dont you get it fitted at TSL???
#6
Phone around and get prices then, may get a good deal if all done in one place, say TSL. Especially if you bought the items there too!
Significant spend in 1 day I reckon...
Significant spend in 1 day I reckon...
Trending Topics
#8
When I did fuel pump, about an hour including making up the wiring connectors.
Injectors probably an hour, moving induction etc. out of way included.
Turbo - did mine in under 3 hours.
Depends how easy the up and down pipe bolts / nuts are to remove...
So look at at least 5 - 6 hours, at their hourly charge.
Injectors probably an hour, moving induction etc. out of way included.
Turbo - did mine in under 3 hours.
Depends how easy the up and down pipe bolts / nuts are to remove...
So look at at least 5 - 6 hours, at their hourly charge.
#9
Got a new turbo (2.5-3 hours plus gaskets), 550cc injectors (manifold lifted for proper fitment 2 hours plus gaskets) and a uprated fuel pump (30 minutes) to be fitted, how much roughly should a garage charge to get these fitted and how long would a job like this take to fit, as i need the following fitted and just wanted to know what to expect to pay and how long it should take. Thanks
Looking at 5-6 hours....plus the remap on top
Looking at 5-6 hours....plus the remap on top
#10
Found somewhere, Subaru Central down the road said he would charge me £30 for the injectors, £30 for the fuel pump and £60 for the turbo because he said the bolts could be a B45tard to get off. Then ill get either a Tek 3 from TSL or a Apexi Power FC if I can get in touch with Andy F.
Last edited by scoobyboy1; 24 September 2004 at 05:09 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM