MY02 settings for tracking
#1
Scooby Regular
Thread Starter
Join Date: Nov 2002
Location: England
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone know the setting for the tracking set-up (standard) on an MY02...and if you do will you please post it on here!!
I had the tracking done after fitting new Toyo's on the front (2 months ago) by some muppets from ATS. It then went back for another go as they said the rig wasn't calibrated correctly (now you see why I refer to them as Muppets).
Having looked at the front tyres I can see scuffing on the outside edges after only 1,500 miles. The handling has never felt the same since the Toyo's were put on, but I originally put this down to change of tyre from Bridgestones...
Now I am beginning to think the set-up is wrong. ATS said they were set up at plus/minus 7 degrees respectively on the front..is that correct?
Thanks
Tony
I had the tracking done after fitting new Toyo's on the front (2 months ago) by some muppets from ATS. It then went back for another go as they said the rig wasn't calibrated correctly (now you see why I refer to them as Muppets).
Having looked at the front tyres I can see scuffing on the outside edges after only 1,500 miles. The handling has never felt the same since the Toyo's were put on, but I originally put this down to change of tyre from Bridgestones...
Now I am beginning to think the set-up is wrong. ATS said they were set up at plus/minus 7 degrees respectively on the front..is that correct?
Thanks
Tony
#3
Tony,
From my owner's handbook:
Assuming 2.0 litre WRX / STi sedan
Toe, front & rear: 0mm
Camber, front -0°25', rear -1°30'
for wrx wagon:
Toe, front & rear: 0mm
Camber, front -0°20', rear -1°20'
This is how it's written in the book, i.e. don't shoot the messenger
±7° seems a cop-out so they can set it to almost anything or not bother altering it and it's still in spec...
Apple
From my owner's handbook:
Assuming 2.0 litre WRX / STi sedan
Toe, front & rear: 0mm
Camber, front -0°25', rear -1°30'
for wrx wagon:
Toe, front & rear: 0mm
Camber, front -0°20', rear -1°20'
This is how it's written in the book, i.e. don't shoot the messenger
±7° seems a cop-out so they can set it to almost anything or not bother altering it and it's still in spec...
Apple
#5
Scooby Regular
Join Date: Mar 2002
Location: diskdepot
Posts: 3,392
Likes: 0
Received 0 Likes
on
0 Posts
Tony
I've just had the Prodrive settings confirmed;
Front: camber - max equal negative, toe-in 1mm.
Rear: camber not adjustable, toe-in 1mm
Hope this is of some use,
Paul
I've just had the Prodrive settings confirmed;
Front: camber - max equal negative, toe-in 1mm.
Rear: camber not adjustable, toe-in 1mm
Hope this is of some use,
Paul
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM