Engine wanted
Miserable
Try talking to the following company, they are always helpful & keep a good stock of decent 2nd hand engines.
API Limited
Phone: (01926) 614522
Contact: David O'Brian
Hope this helps
Phil
Try talking to the following company, they are always helpful & keep a good stock of decent 2nd hand engines.
API Limited
Phone: (01926) 614522
Contact: David O'Brian
Hope this helps
Phil
Where has your crank gone? Can't you repair the engine that you have - I would have thought that this would be the better option. I may be able to find a crank for you that you would have to have ground, and then use over size bearings.
Let me know if I can help.
David
Let me know if I can help.
David
The crank has too much end float...
The rods are apparently shot too...
Piston #4; the ring land on the compression ring failed and broke away(bore wash)...
really bad state...
APi want either 1400 or 1700 for an engine.
[This message has been edited by Miserable (edited 09 April 2001).]
The rods are apparently shot too...
Piston #4; the ring land on the compression ring failed and broke away(bore wash)...
really bad state...

APi want either 1400 or 1700 for an engine.

[This message has been edited by Miserable (edited 09 April 2001).]
Thread
Thread Starter
Forum
Replies
Last Post
Bazil_SW
Engine Management and ECU Remapping
24
Sep 21, 2015 11:55 PM



