Need help setting up Cisco ADSL Router
#1
Need help setting up Cisco ADSL Router
Last week I bought a Cisco SB107 ADSL modem/router to use at home. Being Cisco it's very full of cool features, but it's also an utter nightmare to configure (since I have almost no Ciscon knowledge yet) - being totally manual to configure.
I've got it to connect to my ISP via ADSL, and it seems to authenticate passwords ok, and talk to their DHCP servers ok - but then things go wrong.
When I run a link test I get the following:
Test Activity Summary
Checking interface status... Up
Checking for DNS settings... Successful
Checking interface IP address.. Successful
Checking exit interface... Failed
And it gives me the following detailed info:
Checking exit interface... Failed
Exit interface found :None
Exit interface found :None
Exit interface found :None
And then makes the following useful suggestions:
Troubleshooting Results
Failure Reason(s)
No configured DNS server(s) are routable through the selected interface.
Recommended Action(s)
Select 'Enter IP address or hostname' option or add a 'host specific/network specific/default' route through this interface and retest connection.
It's not immediately obvious where I should make these changes, any suggestions?
Thanks
I've got it to connect to my ISP via ADSL, and it seems to authenticate passwords ok, and talk to their DHCP servers ok - but then things go wrong.
When I run a link test I get the following:
Test Activity Summary
Checking interface status... Up
Checking for DNS settings... Successful
Checking interface IP address.. Successful
Checking exit interface... Failed
And it gives me the following detailed info:
Checking exit interface... Failed
Exit interface found :None
Exit interface found :None
Exit interface found :None
And then makes the following useful suggestions:
Troubleshooting Results
Failure Reason(s)
No configured DNS server(s) are routable through the selected interface.
Recommended Action(s)
Select 'Enter IP address or hostname' option or add a 'host specific/network specific/default' route through this interface and retest connection.
It's not immediately obvious where I should make these changes, any suggestions?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM