help setting up wireless access point - don't know the ip to telnet to
03 September 2005, 01:08 PM
#1
Scooby Regular
Thread Starter
help setting up wireless access point - don't know the ip to telnet to
I have an oldish symbol24 3021 wireless access point which i have plugged into my router, problem is .. i don't know what the ip address is to be able to connect to it.
Is there a way i can find out the ip address from the mac?
It's not showing as getting a dhcp lease in my router setup page, so i presume it must be set to a static ip address with dhcp disabled.
Any ideas People?
Cheers
Andy
Is there a way i can find out the ip address from the mac?
It's not showing as getting a dhcp lease in my router setup page, so i presume it must be set to a static ip address with dhcp disabled.
Any ideas People?
Cheers
Andy
03 September 2005, 06:19 PM
#2
Scooby Regular
Join Date: May 2000
Location: MY00,MY01,RX-8, Alfa 147 & Focus ST :-)
Posts: 10,371
Likes: 0
Received 0 Likes
on
0 Posts
I'd try something obvious like 192.168.1.1 or 1.100 - something like that.
Or try setting your PC to DHCP for the IP address. If the AP has a DHCP server it will give your PC an address. If you do IPCONFIG from a command prompt, you'll see the default gateway which will be the Symbol AP. If not try looking here
Chris
Or try setting your PC to DHCP for the IP address. If the AP has a DHCP server it will give your PC an address. If you do IPCONFIG from a command prompt, you'll see the default gateway which will be the Symbol AP. If not try looking here
Chris
Thread
Thread Starter
Forum
Replies
Last Post
johnnybon
Wheels And Tyres For Sale
7
25 September 2015 07:49 AM
