HHxx

Not content with a p4

The FSB is all down to the motherboard. If your board doesn't support it then you have to get a new one. You maybe able to run a 533fsb cpu at 400fsb, depends on the voltages it needs. Even if it does work then it will be slower than what it is rated at as the multipliers will be different.

Check for bios updates etc.. for you board first. You maybe lucky.

H

super_si

i am unluck
Bios Issue Date: 2002/04/19
BIOS ID: 7C
Support NorthWood 2.4G(100x24) CPU.
Support P4 Celeron CPU.
Raise the adjustable CPU Core Voltage for 0.13 micron process P4 (Northwood).
Fix occasional no POST with debug code 26 issue while "Fixed AGP=66" option was enabled in SoftmenuIII.
Support up to 137GB HDD and above.
HPT 37x BIOS version 2.0.1024. The RAID function is for TH7II-RAID only. This BIOS version is also for non RAID boards and HPT BIOS will be automatically disabled while RAID controller chip not detected.
BIOS compile date: 4/19/2002.


bugger the last update for it

IS it worth upgrading Bios to the latest version?

had to upgrade when i built the pc due to it not liking the Northwood

Si

super_si

Is it a hardware aspect or software realated?

Mines 400 at the moment
the new Northwoods say 533
Would a processor running 533 NEED 533 or work on 400 FSB?

Also can you change the BIOS settings from 400 -> 533?

Cheers

Si

[Edited by super_si - 8/11/2002 12:14:32 PM]