Poledit question
05 July 2002, 12:10 PM
#1
Scooby Regular
Thread Starter
Join Date: Jul 2001
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
When saving Ntconfig.pol using poledit, will settings be lost if not all the ADM tempaltes are loaded when you save.
I want to make a global change to ntconfig.pol but not sure if it will only apply to open templates.
Cheers
FJ
I want to make a global change to ntconfig.pol but not sure if it will only apply to open templates.
Cheers
FJ
05 July 2002, 01:55 PM
#4
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
can you not just load the templates in?
which templates are u missing, or are they custom?
David
which templates are u missing, or are they custom?
David
05 July 2002, 03:10 PM
#5
Scooby Regular
Thread Starter
Join Date: Jul 2001
Posts: 1,112
Likes: 0
Received 0 Likes
on
0 Posts
Custom - it's ok - had another go at it on the test network and the settings ARE saved. Panic over.
I should really try out stuff before I come bleating to Scoobynet
I should really try out stuff before I come bleating to Scoobynet
05 July 2002, 03:44 PM
#6
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
You want to be carefull as certain setting are definitely not saved!
We used to use policys and groups with the visible drive mask setting to hide various drives dependant on groups.. and it used to screw all this up.
David
We used to use policys and groups with the visible drive mask setting to hide various drives dependant on groups.. and it used to screw all this up.
David
Thread
Thread Starter
Forum
Replies
Last Post
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM