Freelander detail
12 October 2009, 10:34 PM
#1
Scooby Regular
Thread Starter
Join Date: Aug 2007
Location: Cheshire
Posts: 376
Likes: 0
Received 0 Likes
on
0 Posts
Freelander detail
Before[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
I got stuck with in with a bottle of apc and started with the petrol cap and door wells and all the other nocks and cranys. Then the megs hyperfoam.
[IMG]
[/IMG]
While that was working its magic a tacked those wheels which i dont think have ever seen some cleaned suff on them. I used megs wheel brighter on them and some good old effort. The tryes and arches where sparyed with degreaser and worker with a brush. The car was then washed of and then refoamed and washed using the 2bm. I then cleaned the tar of with tartis there was quite a lot.
I then clayed the car and wheels using some megs clay and last touch. The car was then dryed off was a delux towel. I sorry i did not take any photos of this stage i forgot.Here are the photos after the claying stage.[
[IMG]
[/IMG]
[IMG]
[/IMG]
I then did the engine bay powerwashed and the used poorboys on all the plastics.
[IMG]
[/IMG]
Once the engine was done then the car have the Werkstat Acrylic Kit put on it as i find this works well on light paints.[[IMG]
[/IMG]
[IMG]
[/IMG]
Now time for the inside.[IMG]
[/IMG]
[IMG]
[/IMG]
Carpets were hovered and some apc and a brush were used to get some of the dirt out as in was well stuck in. All the dash and doors were cleaned. Then the leather seats where cleaned and fed. The glass was the cleaned using megs glass and the tyres gloss gel.Sorry that i took the photo before i cleaned the pedals but they where done with some apc as well.[
[IMG]
[/IMG]
[IMG]
[/IMG]
This is the finished car after a last wipe down.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG][IMG]
[/IMG]
[IMG]
[/IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]I got stuck with in with a bottle of apc and started with the petrol cap and door wells and all the other nocks and cranys. Then the megs hyperfoam.
[IMG]
[/IMG]While that was working its magic a tacked those wheels which i dont think have ever seen some cleaned suff on them. I used megs wheel brighter on them and some good old effort. The tryes and arches where sparyed with degreaser and worker with a brush. The car was then washed of and then refoamed and washed using the 2bm. I then cleaned the tar of with tartis there was quite a lot.
I then clayed the car and wheels using some megs clay and last touch. The car was then dryed off was a delux towel. I sorry i did not take any photos of this stage i forgot.Here are the photos after the claying stage.[
[IMG]
[/IMG][IMG]
[/IMG]I then did the engine bay powerwashed and the used poorboys on all the plastics.
[IMG]
[/IMG]Once the engine was done then the car have the Werkstat Acrylic Kit put on it as i find this works well on light paints.[[IMG]
[/IMG][IMG]
[/IMG]Now time for the inside.[IMG]
[/IMG][IMG]
[/IMG]Carpets were hovered and some apc and a brush were used to get some of the dirt out as in was well stuck in. All the dash and doors were cleaned. Then the leather seats where cleaned and fed. The glass was the cleaned using megs glass and the tyres gloss gel.Sorry that i took the photo before i cleaned the pedals but they where done with some apc as well.[
[IMG]
[/IMG][IMG]
[/IMG]This is the finished car after a last wipe down.
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG][/IMG][IMG]
[/IMG]
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wingnuttzz
Member's Gallery
30
26 April 2022 11:15 PM