engine bay is hangin'!!
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2006
Location: newquay
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
engine bay is hangin'!!
when my car is done i'd like to spruce up the engine bay (few shiney's going in!!) but the engine bay is absolutley skank!!!
it is a white car and all the underbonnet is a brown/beige colour so i'm fully expecting to have to t-cut the paint, is using snow foam a bad idea in there??? which degreasers are best to use???
any help greatfully recieved
it is a white car and all the underbonnet is a brown/beige colour so i'm fully expecting to have to t-cut the paint, is using snow foam a bad idea in there??? which degreasers are best to use???
any help greatfully recieved
#2
Put the T Cut on hold. Is the brown residue from a burst pipe? Try a degreaser Gunk or similar together with a selection of brushes.Prior to applying degreaser. Cover your alternator and alarm. Spray liberally Rinse with a low pressure hose. Repeat as necessary. Then apply finishing product such as Autoglym rubber care
#4
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
Or, you could ring up Polished Bliss and ask for a little advice from them. Very helpful when I've rang up.
#6
Scooby Regular
iTrader: (22)
Join Date: May 2006
Location: Doncaster, S. Yorks.
Posts: 21,415
Received 0 Likes
on
0 Posts
#7
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Jun 2006
Location: newquay
Posts: 6,880
Likes: 0
Received 0 Likes
on
0 Posts
should have done it while the engine was out really, but work has kept me away from it, couldn't really ask my mate to do it as he's doing the engine as a favour.......
Trending Topics
#8
Former Sponsor
iTrader: (3)
Join Date: Feb 2006
Location: AB51 0TH
Posts: 2,562
Likes: 0
Received 0 Likes
on
0 Posts
Full guide to safe and effective wet engine bay detailing here...
Car Care Advice - Engine - How to safely clean and protect your engine bay
I'd suggest stepping up to Meguiars Super Degreaser cut 4:1 (instead of the R222 TAW shown in the guide) to tackle really stubborn grime, followed by 303 Aerospace to reprotect all surfaces afterwards.
Car Care Advice - Engine - How to safely clean and protect your engine bay
I'd suggest stepping up to Meguiars Super Degreaser cut 4:1 (instead of the R222 TAW shown in the guide) to tackle really stubborn grime, followed by 303 Aerospace to reprotect all surfaces afterwards.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM