Notices
Car Care Discussion on how to keep your pride and joy looking at it's best.

using my machine polisher tomorrow for the first time....

Old Jan 31, 2007 | 02:06 AM
  #1  
X30NGO's Avatar
X30NGO
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 428
Likes: 0
From: Liverpool kidder
Default using my machine polisher tomorrow for the first time....

I'm about to use my machine polisher tomorrow, weather permitting. I've read everything there is to read on polishedbliss.co.uk and learnt a lot, but i was wondering, as i have a **** off vat of it already... is Autoglym Super resin polish going to work a great deal?? I have decent paintwork. Certainly not excellent, but averagly shiny, if that makes any sence at all. I have looked on the autoglym site which has helped a little.

I suppose i'd like to see some replies from people who may use machine polishers, who have maybe used super resin with a machine etc etc. Just would like do have some success tomorrow rather than spending hours doing it with no result!!

cheers.
Reply
Old Jan 31, 2007 | 02:22 AM
  #2  
STIain's Avatar
STIain
Scooby Newbie
 
Joined: Jan 2007
Posts: 28
Likes: 0
From: NE scotland
Default

I think the srp will be good for getting out minor swirls etc. it should also give you a good shine but think there is better products on the market than that but it all depends on what kind of finish you are after? What kind of wax are you planning on using after the polish stage?
Reply
Old Jan 31, 2007 | 02:51 AM
  #3  
X30NGO's Avatar
X30NGO
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 428
Likes: 0
From: Liverpool kidder
Default

well i wa under the impression that autoglym products where very good??? So i was going to use possibly the Autoglym Extra Gloss Protection??

I am going to order some Menzerna Final Polish II and Menzerna Finishing Touch Glaze, but as i'm going to give it a go tomorrow, i'm a bit limited to halfords!! I'm pretty sure i can get good results if i get the right stuff from there for tomorrow though!! The SRP should be a winner then for this first go, what you think about the sealant/wax, from halfords... Autoglym?? or you recomend something else??
Reply
Old Jan 31, 2007 | 03:13 AM
  #4  
STIain's Avatar
STIain
Scooby Newbie
 
Joined: Jan 2007
Posts: 28
Likes: 0
From: NE scotland
Default

Autoglym are good products but there is def much better out there. It will do for your 1st attempt with the pc and yeah the egp will be good to use after the srp.
Get some blackfire of jeffs products ordered from polish bliss and you will be amazed with the end results, i don't use a pc and get a good finish with the jeffs acrylic kit so using a pc will be even better.
Menzerna is also really good, i use the intensive polish to get out scratches and have heard good things about final polish and the glaze.
I will go and have a look and see if halford website have any products i could recommend you use tomorrow until your menzerna arrives.
Reply
Old Jan 31, 2007 | 03:17 AM
  #5  
X30NGO's Avatar
X30NGO
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 428
Likes: 0
From: Liverpool kidder
Default

that'd be great, thanks mate! look forward to what you come up with!

(i never realised how complicated it all gets when you look into it!!!)
Reply
Old Jan 31, 2007 | 03:26 AM
  #6  
STIain's Avatar
STIain
Scooby Newbie
 
Joined: Jan 2007
Posts: 28
Likes: 0
From: NE scotland
Default

Ok had a look and it seems they only do autoglym or turtle wax. they are doing a deal on the website 3 for 2 on autoglym products so if you can get that in store tomorrow great get the srp, egp and fast glass. Also noticed the have zymol wax i have also heard good things about this but have never tried it myself. Best bet for tomorrow is the autoglym mate. Things do get complicated but i have found the site Detailing World - A world for detailers by detailers. very usefull so get on there too for more advice in the future and prepare to be very confused as they know thier stuff.
Finally take some pics of before and after and post them up and you can also compare them to when you get other products.

Iain.
Reply
Old Jan 31, 2007 | 03:33 AM
  #7  
X30NGO's Avatar
X30NGO
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 428
Likes: 0
From: Liverpool kidder
Default

time for bed!! thanks a lot for the help!! and at this time too!!
Reply
Old Jan 31, 2007 | 03:41 AM
  #8  
STIain's Avatar
STIain
Scooby Newbie
 
Joined: Jan 2007
Posts: 28
Likes: 0
From: NE scotland
Default

No problem, i'm at work so don't have anything better to do lol
Reply
Old Jan 31, 2007 | 12:58 PM
  #9  
X30NGO's Avatar
X30NGO
Thread Starter
Scooby Regular
 
Joined: Dec 2006
Posts: 428
Likes: 0
From: Liverpool kidder
Default

twatting rain
Reply
Old Jan 31, 2007 | 04:18 PM
  #10  
Rich @ PB's Avatar
Rich @ PB
Former Sponsor
iTrader: (3)
 
Joined: Feb 2006
Posts: 2,562
Likes: 0
From: AB51 0TH
Default

Aye, pish day today! All good advice above, SRP is fine as a one step product by PC using a polishing or finishing pad. Note that it seals as it polishes, so you don't have to top it with anything at all! However, an Autoglym last step product would obviously add more protection. The benefits of one step products like SRP are exactly that; one step, thus saving time and effort (and money). However, much better results can be had by breaking down detailing into more stages, and doing separate polishing and protection steps will give better results. On Scooby paint (and typical Scooby colours), Blackfire and Menzerna polishes work well, and as for last step protection products, well Jeffs Werkstatt Acrylic system looks ace on anything metallic (plus solid black, and white) while on solid red and blue either the Jeffs Werkstatt Carnauba system or Blackfire Wet Diamond looks great (wet Diamond also really suits WR Blue, and has proved very popular on here over the last eight months or so). The main thing though is to make a start and get some practice with the PC - SRP is ideal for this as it won't be overly aggressive.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
Abx
Subaru
22
Jan 9, 2016 05:42 PM
IanG1983
Wheels, Tyres & Brakes
2
Oct 6, 2015 03:08 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
lozgti1
Non Scooby Related
8
Sep 28, 2015 03:49 AM


Thread Tools
Search this Thread

All times are GMT +1. The time now is 12:35 PM.