Notices
Car Care Discussion on how to keep your pride and joy looking at it's best.

Wanting to switch from hand polish to PC

Old Jan 27, 2007 | 10:41 AM
  #1  
MisterAdam's Avatar
MisterAdam
Thread Starter
Scooby Regular
 
Joined: Jan 2007
Posts: 210
Likes: 0
From: Merseyside
Default Wanting to switch from hand polish to PC

Hi lads,

I've always done my polishing by hand but im never overly happy with the results, and its hard work too, so im wanting to switch to a PC, but i've got quite a lot of questions because i dont know too much about them

In my garage i've got

Meg's wash mitt
Meg's Shampoo
Meg's chamios
Meg's polishing pads
Meg's Step 1 Paint cleaner
Meg's Step 2 Polish
Meg's Step 3 Carbnara wax (sp)

and a few extra Autoglym bits that im running out that shall be replaced with more Meguiar's as i have had better results with the Meg's.

Where do i want to be buying a PC from?
How much are they and what do i want to be spending?
Would the products i already have be ok to use with a PC?
Would i need different pads for using on each step? (cleaner, polish, wax)
How often to the pads need changing?
Are they reusuable/machine washable?
Would i need to use different speeds depending on which step im doing?

Sorry for all the questions, and help would be greatly appriciated
Reply
Old Jan 27, 2007 | 12:20 PM
  #2  
Phil's Avatar
Phil
Track Day Organiser
 
Joined: Aug 2001
Posts: 23,377
Likes: 0
From: SX
Default

Best read Polished Bliss's guides as they are pretty much spot on
Reply
Old Jan 27, 2007 | 03:33 PM
  #3  
Scudy23's Avatar
Scudy23
Scooby Regular
iTrader: (2)
 
Joined: Dec 2005
Posts: 1,262
Likes: 0
From: South Wales
Default

Originally Posted by MisterAdam
Hi lads,

I've always done my polishing by hand but im never overly happy with the results, and its hard work too, so im wanting to switch to a PC, but i've got quite a lot of questions because i dont know too much about them

In my garage i've got

Meg's wash mitt
Meg's Shampoo
Meg's chamios
Meg's polishing pads
Meg's Step 1 Paint cleaner
Meg's Step 2 Polish
Meg's Step 3 Carbnara wax (sp)

and a few extra Autoglym bits that im running out that shall be replaced with more Meguiar's as i have had better results with the Meg's.

Where do i want to be buying a PC from? - Autopia
How much are they and what do i want to be spending? - get a kit its cheaperWould the products i already have be ok to use with a PC? - Yep
Would i need different pads for using on each step? (cleaner, polish, wax) They come with it from autopia
How often to the pads need changing? - Depends
Are they reusuable/machine washable? - Yep,wash by hand

Would i need to use different speeds depending on which step im doing? - Yes,pc speeds go from 1 to 6
Sorry for all the questions, and help would be greatly appriciated
You will find alot of answers at detailingworld.co.uk,the PC also needs a transformer because of the 110v, a 110v plug so you can change the US plug.As for price i think it would cost around 120-130 area without the transformer.

I would/did set myself 200 for extra bits from autopia which is worth it cos its cheaper plus they are import friendly so no taxes against you over here.

Anyway check out detailingworld.co.uk and go to the guide section it will explain a bit better............then Pm 182_Blue for a dicount code for autopia.

Scud
Reply
Old Jan 30, 2007 | 10:59 AM
  #4  
Rich @ PB's Avatar
Rich @ PB
Former Sponsor
iTrader: (3)
 
Joined: Feb 2006
Posts: 2,562
Likes: 0
From: AB51 0TH
Default

Just to add my 5p worth...

Best place to buy is Detailing Supplies, Car Wax, Car Polish, Polishers, Microfiber Towels, for the reasons Scudy gives: it's cheap, great service, no import duty, good aftersales care if anything goes wrong, etc. I'll pm you the discount code after posting this!

Best kit to buy (and it is a good idea to get a kit when starting out as it will save you money) is the Sonus DAS Kit, with orange, green and blue pads...

Porter Cable Car Polisher Kit - 7424 Polisher, Foam Pads, Bonnets

...as these pads work best on Scooby paint. In terms of products, ditch what you have in terms of the Megs 3 Step System and switch to Blackfire SRC Finishing Polish or Menzerna 106FF (both the same product), applied using the green pad at speed 4-5 after one pass at speed 1 to spread. Work until residue turns clear and then buff with Super Thick n Plush Towel. Follow up with a last step product (wax or sealant) that best suits your car; there's a lot of threads in this section showing the different finishes various products give, have a browse and see what you like. Also, be sure to spend a little time reading the guides on my webbie; they contain a lot of useful info!

Car Care Advice

Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
34
Nov 7, 2024 04:10 PM
scottydouk
Wanted
2
Sep 28, 2015 08:26 PM
Littleted
Computer & Technology Related
42
Sep 26, 2015 09:48 AM
markr1963
Computer & Technology Related
21
Sep 23, 2015 12:07 PM
SwissTony
Member's Gallery
4
Sep 21, 2015 10:26 AM


Thread Tools
Search this Thread

All times are GMT +1. The time now is 05:21 AM.