Upon replacing the downpipe do you leave off all the heat sheilds?????????
F@£KING HELL WHAT A DIFFERENCE!!!!!!!!!!!

 

Mine are still on ( I believe it get's a little hotter than standard ).

Glad your enjoying it.

 

Jason

have you taken out the centre section as well ? and replaced the back box ? it makes it sound awesome !

Greg

 

Jason what you have to do is trim a section away from the rear untill it goes over the new front pipe, it is benifical to replace the heat shield as it will heat up your brake fluid to much and cause a spongy feel to the brakes (not recommended).

 

Hi Jason

You need to make a cut from the top of the shields rear arch, across so that it passes down just below the bolt hole, to the corner and then straight down to the bottom.

The heat gain without it is not excessive and would not heat the brake fluid enough for you to notice a difference (my RA does not have the heatshield fitted), but its worth doing all the same.

Glad you like it

 

Pete

Is your RA mostly for tracks or are you gonna mix it with the gravel.

Kiwi's not enjoying his EVO VI as much as he thought.

 

Cheers Pete and the rest of you.
Centre section soon to be ordered!!!!!!!