Notices
General Technical
Sponsored by:
Sponsored by: CARiD

Hawkeye smoking :(

Thread Tools
 
Search this Thread
 
Old Sep 26, 2012 | 07:58 AM
  #1  
hibbs's Avatar
hibbs
Thread Starter
Scooby Regular
iTrader: (7)
 
Joined: Dec 2011
Posts: 732
Likes: 0
From: new mills
Default Hawkeye smoking :(

My hawkeye started smoking lightly under boost so I thought instantly it would be the turbo in its early stages. I replaced this and it's only getting worse anyone had the same issue, hoping its not the rings
Reply
Old Sep 26, 2012 | 08:25 AM
  #2  
Gear Head's Avatar
Gear Head
Scooby Regular
iTrader: (2)
 
Joined: Apr 2004
Posts: 15,029
Likes: 0
From: Somewhere in Kent, sniffing some V-Power
Default

Originally Posted by hibbs
My hawkeye started smoking lightly under boost so I thought instantly it would be the turbo in its early stages. I replaced this and it's only getting worse anyone had the same issue, hoping its not the rings
What colour smoke? Blue I take it?
Reply
Old Sep 26, 2012 | 08:26 AM
  #3  
Infected by sti's Avatar
Infected by sti
Scooby Regular
iTrader: (6)
 
Joined: May 2012
Posts: 3,221
Likes: 0
From: Cardiff
Default

Is it using oil? And a 2.5 uk? Have read plenty of posts on here regarding engine failure and ringland issues on the pistons, not saying it is but google 2.5 engine probs and a list will appear, best of luck with it fella, really hope it aint tremendous bad news for you
Reply
Old Sep 26, 2012 | 08:33 AM
  #4  
BrownPantsRacing's Avatar
BrownPantsRacing
Scooby Regular
iTrader: (6)
 
Joined: Oct 2010
Posts: 8,701
Likes: 128
From: Herts & Bucks
Default

Doesnt sound good if the turbo has been changed.

best get a compression test, that will confirm either way. Good luck!
Reply
Old Sep 26, 2012 | 08:44 AM
  #5  
hibbs's Avatar
hibbs
Thread Starter
Scooby Regular
iTrader: (7)
 
Joined: Dec 2011
Posts: 732
Likes: 0
From: new mills
Default

Originally Posted by Gear Head
What colour smoke? Blue I take it?
Yes it is blue smoke
Reply
Old Sep 26, 2012 | 08:45 AM
  #6  
Slowboy Racing's Avatar
Slowboy Racing
Former Sponsor
 
Joined: Dec 2005
Posts: 1,658
Likes: 0
From: 10.68 QT mile in 2007 2.33 Type R ** Current 2002 Spec C 2.33 Track prepped.
Default

Compression test to start with.
Reply
Old Sep 26, 2012 | 08:46 AM
  #7  
hibbs's Avatar
hibbs
Thread Starter
Scooby Regular
iTrader: (7)
 
Joined: Dec 2011
Posts: 732
Likes: 0
From: new mills
Default

Originally Posted by Infected by sti
Is it using oil? And a 2.5 uk? Have read plenty of posts on here regarding engine failure and ringland issues on the pistons, not saying it is but google 2.5 engine probs and a list will appear, best of luck with it fella, really hope it aint tremendous bad news for you
Yeah is using oil and iv read some posts about it was kinda hoping it could have been something else but looking like it ain't. Cheers buddy thanks for the replys guys
Reply
Old Sep 26, 2012 | 10:15 AM
  #8  
Alan Jeffery's Avatar
Alan Jeffery
Scooby Regular
 
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Default

The most common issue is ring land breakage to the pistons.
I took this picture yesterday from a Hatch engine, (Same pistons) and you can clearly see the result! This owner sensibly hasn't carried on running it once the problem became obvious, so he's avoided real bore damage.



We are well used to dealing with this one!
Reply
Old Sep 27, 2012 | 08:32 AM
  #9  
hibbs's Avatar
hibbs
Thread Starter
Scooby Regular
iTrader: (7)
 
Joined: Dec 2011
Posts: 732
Likes: 0
From: new mills
Default

What's the best aftermarket pistons to put back in?? Weisco any good ? Cheers
Reply
Old Sep 27, 2012 | 09:36 AM
  #10  
Alan Jeffery's Avatar
Alan Jeffery
Scooby Regular
 
Joined: Nov 2006
Posts: 3,662
Likes: 0
From: Enginetuner.co.uk Plymouth Dyno Dynamics RR Engine machining and building EcuTek SimTek mapping
Default

Originally Posted by hibbs
What's the best aftermarket pistons to put back in?? Weisco any good ? Cheers
We would usually choose Mahle these days. They are a top quality piston and we don't get issues with incorrectly packed rings, which was becoming an annoyance with Wiseco. It was as though they were just chucking any old thing in the box. Only a perfect fit is acceptable of course.
When I say "usually" it's in response to the way all piston manufacturers batch produce pistons, and the fact that they aren't always available when you need them from suppliers.
Call me if we can help with any aspects of machining or building.
Reply
Old Sep 28, 2012 | 12:37 PM
  #11  
Primeiro's Avatar
Primeiro
Scooby Regular
 
Joined: Dec 2011
Posts: 140
Likes: 0
From: Aylesbury
Default

Hi Hibbs

If budget can cope go with Omega pistons, however plenty of quality alternatives as already stated.

All the best with it.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM
kenc
Wanted
6
Oct 2, 2015 09:12 PM
Ganz1983
Subaru
5
Oct 2, 2015 09:22 AM
MightyArsenal
Wheels, Tyres & Brakes
6
Sep 25, 2015 08:31 PM




All times are GMT +1. The time now is 08:33 AM.